cincyTT
3/15/2008 7:45:33 PM
If you havent, you should either weld a lip on the edges or atleast run a thin bead of jb weld. If not, you can and will blow off that connection rather easy.
MIMOSA
3/15/2008 11:29:52 PM
That looks hot! I have decided to do the same, but using a greddy plum back BOV.
Jeff
3/16/2008 10:49:31 AM
prove it, i want to see a ko3 push that much. that should be good for 1000whp
quote:
ORIGINAL: The Bishop
It's actually schedule 40 fire sprinkler pipe. It can handle 175psi 
The Bishop
3/16/2008 11:01:36 AM
Don't tempt me Jeff, I'll do it.
And don't worry cincy there isn't enough room where it is placed for the hoses to blow off. It would take probably 100psi to blow off.
pimphell
3/16/2008 2:36:42 PM
Bishop...I give you A+ for creativity. Never thought I would see that done and even a recurculation setup...I give you props.
You know... we live rather close to one another. I live in the springs
cincyTT
3/16/2008 2:42:14 PM
quote:
ORIGINAL: pimphell
Bishop...I give you A+ for creativity. Never thought I would see that done and even a recurculation setup...I give you props
Its been done more than a few times. There is even a how to on passat world from years ago.
feerocknok
3/17/2008 11:39:10 AM
Wasn't someone on here running 40-45 psi with a mbc for a couple months?
cincyTT
3/17/2008 12:13:38 PM
No turbo that people on here run will make it to 40psi. Jeff use to run around 30psi on his A4 back in the day, but thats it.
feerocknok
4/3/2008 11:54:55 PM
quote:
ORIGINAL: The Bishop
I am a project engineer for a large mechanical contractor, so I just had the guys fab me up a pipe. Took them about 8 minutes.
It's actually schedule 40 fire sprinkler pipe. It can handle 175psi
Do you remember I.D.s on these guys?
I can pull em off and check, but I'd rather just make the piece and unbolt the old stuff when I'm putting the piece in.
