[ View Full Version Of This Page ]

hesitation & sputter issues and cluster issues

All Forums » Audi A6 » hesitation & sputter issues and cluster issues

kenestle
11/28/2004 7:45:37 PM
Hey i have a 2001 a6 2.7t, when i first start my car in the am to goto work i usually let it run for a few minutes, however when i take off the car seems like its not getting gas or something, kinda sputters and hesitates, but after about 20 seconds of acceleration it goes away, i used the vag-com, and there are no codes.
Any ideas? I am going to bring it to the stealership, i still have 55k on cpo.

Also everytime i start my car a different line on the instrument cluster is out on the diagnostics screen. Is this covered by cpo?
clconversion
11/29/2004 1:56:37 PM
sorry for sounding like a tard but what is CPO and I may be able to help you out
kenestle
11/29/2004 2:36:39 PM
Certified pre-owned
felk_2.7T
11/29/2004 9:50:45 PM
believe it or not but the solution is super easy....stop using 91+ octane in the car, use 89...I have a 2000 A6 2.7T and I always used 93 octane...I had the same problem, the car has a hard time burning the fuel when the car was cold...I put in a tank of 89 octane and it imediately cleared it up! I'll switch back to 93 octane when to temperature goes back up...give it a try, you'll be surprised.

Jeff
kenestle
11/29/2004 10:00:53 PM
interesting, has anyone else seen these results?
felk_2.7T
11/29/2004 10:05:15 PM
yes, someone told me the same...
kenestle
12/4/2004 5:31:01 PM
Thanks, i'll keep this in mind
Related Threads

[ View Full Version Of This Page ]

Return to the Audi Forums home page - Archive Home