rvt1000
11/14/2007 9:36:55 AM
Car details 97 A6 Quattro
I bought this used and everything seems to work fine. The power mirrors/seats work in every direction but for some reason the memory switch does not. I have tried setting it according to the manual, but it does not store it. On the other hand the remote has the old owners info stored, so everytime I lock/unlock the car the mirrors move from my previous manual setting, to his setting. I have tried storing my current setup of seat/mirrors into the remote but it will not store it. Do I have a bad memory switch ? Bad fuse somewhere that controls the switch ?
Thanks
rvt1000
11/14/2007 4:26:39 PM
Also forgot to mention I had the the batteries replaced on the remote and it still held the previous settings of the mirrors
auditech79
11/14/2007 5:03:48 PM
Your either not doing it correctly or the memory switch is bad. Also try looking at the sub harness inside the door which i have seen corrosion on the connectors before causing high resistance.
rvt1000
11/14/2007 7:55:11 PM
quote:
ORIGINAL: auditech79
Your either not doing it correctly or the memory switch is bad. Also try looking at the sub harness inside the door which i have seen corrosion on the connectors before causing high resistance.
Do I need to remove the door panel to get to the sub harness ?
