power and speed

i just got back from iraq and i have some money in the bank. im looking at getting the awe ko4 kit J31file a fmic,neuspeed exhaust, and southbend stg II clutch and flywheel kit. what kind of numbers am i gonna see at the wheels and what kind of cars could i be pulling way from. thanks guys. all i have right now is a evoms intake and giac chip with a evoms dv. am i gonna notice a big difference after i do all the other mods. my car is a 2000 1.8tq 5spd

about 170 at the wheels? and yes you will notice a huge difference. 

ko4 is only going to net you about 10-15whp more than a ko3 pushed the same.  Not to mention only have power from 3-5k.  Why not atleast go with something a little bigger?  A gt2x elim will get you atleast another 20+whp and tq all while giving you a much more useable powerband.  People have gotten low 13's with this elim and only making 15's with ko4's.  Cost will only be a few hundred more.

yeah but i wanna mantain somewhat decent driveability and not blow my engine
 

i dont even think they offer the j31 file anymore. You definitly wont "blow your engine" with a gt2x elim.

Cincy, who the hell is turning low 13's with a gt2x eliminator? And k04's run in the 14's commonly

they do still offeer the j31 file, what about this kit http://www.034motorsport.com/product_info.php?cPath=21_102&products_id=268 what kind of track times you think
 

Sleeper, a K03 and a K04 are the exact same thing pretty much. A GT2X is still considering a small-frame turbocharger, so you're not going to put any stress on your engine through the hammering of a turbo. Keep in mind people have GT2871R turbos on their cars, and are still running just fine.

A GT2X is rated at 290hp, while a GT2871R is rated up to 460hp.

what kind of numbers am i gonna get from th gt2871

thats the setup im planning on getting for this summer. im replacing the rods, along w/ all the other needed upgrades. the tune i plan on going with is gunna be around 320chp on pump and around 390chp on race gas.

im stickin with the KO4 with the j31 file. ill get into the low 14's when im done with it ill post the timeslip in a couple months