Well I am half way done with my Forge FMIC and intake manifold so thas good but I am having real trouble with the hoses that connect to the intake manifold. The instructions they send are not very clear so I am getting confused. What I need to know is which hoses go to the little nipples of the manifold.Also I need to know the names of different hoses. I will post pictures of the ones I need to know.

This is the nipple on the manifold on the opposite side of the TB.

These are two small ones on the bottom of the manifold.

This is the bigger nipple on the bottom of the manifold.

This is the nipple on the TB.





I dont know what this black thing is or what hose connects to it...



I am sorry about so many pictures and all this stuff but if you could help me I would appreciate it more than you can fathom.

 

come on someone has to know where all this stuff goes...

 

lableing as you removed them would of been smart. The one on the end across from the TB is the brake booster, one should go to the dv hardlines. thats all i can think of right now

 

the last pic goes to the TB. thats a one way valve, lets air past, but not back through.

 

thank you cincy.. but one thing that I dont understand is on the stock 180 manifold there are two big nipples and one small nipple but on the 225 manifold there is one big nipple and two small ones(these nippels are on the bottom on the manifold) Can anyone explain this??

 

the must of just decided to use a larger diameter vac line for another something they deemed needed it.