B7 A4 OEM Bi-Xenons (CC'd & Blacked out housings) + JOM [ECS] Smoked LED Tail Lights
#1
B7 A4 OEM Bi-Xenons (CC'd & Blacked out housings) + JOM [ECS] Smoked LED Tail Lights
-OEM Bi-Xenons AFS (CC & Blackout Mods) with bulbs, ballasts and harness : I am the second owner of these Adaptive Bi-Xenons. I personally clear corner modded them ($100 new for caps and OEM chrome bulbs via Phil “fly300kts”) as well as the housing painted matte black. The headlights ($1694 new) come with the Kufatec Wire Harness ($79 new) , Ziza 6000K D1S Xenon Bulbs ($150 new), Ziza/ ECS LED City Light ($50 new), Nokya Hyper White 1156 Daytime Running Light (DRL) bulbs http://www.ebay.com/itm/120933920358?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT&rmvSB=true, and two ballast (Used from Phil “fly300kts”, $100/ballast valued online). I also have the Nokya Hyper Yellow 1156 DRL bulbs (http://www.ebay.com/itm/NOKYA-1156-BULB-HYPER-YELLOW-21W-TURN-SIGNAL-TAIL-LIGHT-NOK5235-QTY-2-/110960917728?hash=item19d5c93ce0&vxp=mtr), had been used for about a month until I switched to the Hyper Whites (I didn't like the look as much) that I will throw in. Pictures of both colored DRLs installed are provided
Lens is in good condition but there are minor blemishes on the outside due to highway driving, recently the LED City Lights has been flickering on rare occasion but I believe the bulbs might have incorrect polarity installed. When I had my exhaust on, the right headlight would flicker when idling because of the drone. *Note: Left headlight is missing the back cap, previous owner did not supply it and I was short on time. I have heat resistant tape surrounding the socket.*
Asking Price: $785 OBO
Lens is in good condition but there are minor blemishes on the outside due to highway driving, recently the LED City Lights has been flickering on rare occasion but I believe the bulbs might have incorrect polarity installed. When I had my exhaust on, the right headlight would flicker when idling because of the drone. *Note: Left headlight is missing the back cap, previous owner did not supply it and I was short on time. I have heat resistant tape surrounding the socket.*
Asking Price: $785 OBO
Last edited by mpv314; 02-05-2016 at 09:52 PM.
#2
ITEM SOLD
Pictures of crack
Pictures of crack
Last edited by mpv314; 12-01-2015 at 12:15 AM.
#3
everything still for sale, send me some offers I am willing to negotiate on pricing
#4
Breached our contract to buy/sell wheels to sell to his Dad for a higher price after taking my deposit (refunded), buyer beware.
#5
Volyer I do apologize about our misunderstanding. I informed you of the circumstance change, refunded your deposit to you in full immediately after contacting you, and proceeded on. No harm no foul. Check any of my feedback on other websites ( I am infrequent to this one) and you will see that I am a reputable seller.
#8
TAIL LIGHTS SOLD
Taking offers on the OEM Bi-Xenon's still
Taking offers on the OEM Bi-Xenon's still
#9
Bi-xenons still for sale. Price drop
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning
B7 Models
0
07-10-2014 04:55 PM