Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Welcome to Audi Forums!
Welcome to Audi Forums,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm having a turn signal issue. They won't even flash. Checked the fuse, it's not that. The hazards work. Any suggestions? Anyone have this issue before and/or the know-how to remedy it?
I'm so desperate I'm almost considering offering a freakin' reward. But, for now... Thank you graciously for your help.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Audi Forums!
__________________
-JAK.
Audi is Love.
'02 A6 3.0 Quattro - "Adolph", my Knight in Alpaka Beige Metallic armor.
__________________ 99.5 A4 1.8TQ | K&N | Res Delete | SpeedTuning 1.3Bar Chip | 18PSI | GlowShift Gauges | Samco Hoses | Double Din Swap | S4 Steering Wheel
Coming Soon: New Car Lots Of Stuff For salesee this also
__________________ 99.5 A4 1.8TQ | K&N | Res Delete | SpeedTuning 1.3Bar Chip | 18PSI | GlowShift Gauges | Samco Hoses | Double Din Swap | S4 Steering Wheel
Coming Soon: New Car Lots Of Stuff For salesee this also
you've got a bad hazard switch bud, the hazards will still work but the relay for the turn sigs lives in there as well and that goes bad. One out of every 100 times i've seen a turn signal stalk go bad, but considering how cheap thehazard switch is it's worth taking a shot. pull the trim off around the hazard switch, esp button,etc and pull the switch out. all you need is a flat head screwdriver
Turn signals don't work.
