turn the ignition on

press and hold the re-circulate air button

press the up arrow

let go off all buttons

now select 1 degrees C

then press re-circulate button again

and it will give you a code 00.0 means no errors if you get a code pm and ill tell you what it is




another way to get it up is. . .

start your car then on your climate control panel press and hold in fan down, temp colder and ECON at the same time

you will see a mode sayin 1 degrees C and press recirculate key to enter


each degree c is another option all the way up to 61 and 16 or 17 and the normal speedo ones

aircon system codes only

yeh your right sorry i never noticed

any free information is welcome mate and its good to see it here

it does tell you your potenciometer reading and all sorts and tempritures from all over the car

my a3 wont change from kph to mph though i have tried both ways to do it its not havin it

nedd help with code P0341

I'm showing that to be cam shaft position sensor...hope that helps

__________________
99 Audi A6 Avant
77 Datsun w/chev. 350
99 Ford 250 SD Diesel

Ok can you say wich number from 1-99 is the outside temperature?

well the actual code is 00779 but if only 2 digits ill have to guess its 79