ECU pinout for 2.8l

Audi Forums Audi Classifieds Photo Gallery Calendars Search Recalls TSB's Contact AF Sponsors
Audi Lineup Audi News Forum FAQ AF Decals Audi Timeslips Register Login

ECU pinout for 2.8l

Printable Version

Audi Forums >> Audi Reviews >> Computer & Fuel Systems >> ECU pinout for 2.8l

Page: [1]

Message

<< Older Topic Newer Topic >>

ECU pinout for 2.8l - 10/30/2006 12:07:38 PM

Wicked Vision

Posts: 3
Joined: 10/2/2006
Status: offline

Does anyone have the ECU pinout for a 2000 audi a6 2.8? I am installing a pair of rear o2 simulators so that I can get rid of the CEL and pass emissions. Thanks

Post #: 1

RE: ECU pinout for 2.8l - 10/30/2006 3:05:01 PM

techbod

Posts: 12831
Joined: 11/4/2005
Status: offline

HO2S 1, bank 1 right hand side of engine pins 25/26 shield wire pin is 14,
HO2S 1 bank 2 bank = pins 39/40 shield = pin 14,

im thinking pin 25 is first o2 sensor and 26 is second and so on

Thumbnail Image

Attachment (1)

_____________________________

Dave
UK member

(in reply to Wicked Vision)

Post #: 2

RE: ECU pinout for 2.8l - 10/31/2006 5:48:36 PM

Wicked Vision

Posts: 3
Joined: 10/2/2006
Status: offline

Thanks for the help, it would have taken forever to probe all the ecu wires

(in reply to techbod)

Post #: 3

ECU pinout for 2.7l? - 2/25/2008 7:14:22 AM

rageman

Posts: 4
Joined: 3/15/2006
Status: offline

Sorry to be digging this thread up after so long - any chance you have the pinouts for a 2000 A6 2.7t? I am installing an avc-r and need the following:
speed sensor
rpm
and throttle
I was using this as an example for what to grab:
http://forums.audiworld.com/s4/msgs/2384267.phtml
but I am not sure if the S4 and A6 share the same wiring (although I suspect the APB engine code does).
Any help would be appreciated.
Sean

(in reply to Wicked Vision)

Post #: 4