Hey guys how do i remove door panel?? Here are some pictures of the screws i found (and tried unscrewing, where one screw ended up not being able to be put back in properly )
Can someone please tell me how i could remove the door panel??
as i do not know what type of audi you have, this is how u remove the panels in the B5 A4, remove the 2 black screws in each corner as shown in the pic, remove the screw inside the handle/arm rest as shown in the pic, and that inner piece should slide down. then remove the 2 bolts/screws that apear after the inner piece of the door handle/arm rest, and carefully pull up on the panel and presto. heres an article as well on it http://www.audiworld.com/tech/int13.shtml
if u dont mine me asking, why do u want to remove ur door panels for?
and i believe u have an A3, i dont know much about those cars as i have NEVER been in one, best thng for you to do is to post in the A3 room and ask the same question on how to remove the door panel. whats a good investement is the bently manual, will tell u EVERYTHING you need to know about you car.
i want to add some wires to add a light into the door pocket.. Oh right ok will post it in that forum... and will read up on the bently manuals! thanks mate!
yeah cheers guys i got it sorted! just the two screws, remove the electrical cables from the handle part and then just lift the hole door and pull out. quite simple actually!!
Removing Door Panel
)
