First post so Hi everyone...

I have a 2003 A4 1.8T

Wondered if anyone can help me answer this one, it's quite a minor mod but I'm wanting to replace the alarm LED on the door for a blue one - is there any voltage requirements or could I just stick any old LED in there?

Also how would I get to it - would it be removing the door card or just prize out the rubber surround of the existing one?

Seems like a lot of work.

__________________
2000 A4 1.8T Quattro tip
APR 93 chip
710N
ECS N75 Race Valve
Tip Chip
Borla Exhaust
Sports Suspension
Cracked windshield (again), 3rd timing belt

as far as i know you have to remove the whole door panel to get to it and any led intended for a alarm should work

__________________
01 Audi A4 Quattro, Mystery chip, Abd intake, Bilsten sports, H&R springs, Neuspeed front and rear sways and exhaust, Atp test pipe, JHM linkage, complete rs4 body kit, 18" Falkens, Nitto invo tires, Forge 007 and unos Mbc, 034 street trans mounts.

but then it won't match the dash!!!

bmw = blue
audi = red...

__________________
'98 A4Q 1.8T 5spd

snubbed
ECS Slotted rotors
DG SS
APR Stage 1
VDO boost and oil pressure a-pillar gauges

He will have to do the dash too

__________________

2000 Audi A4 1.8Tq, AJL engine, manual, H&R Race springs & RS4 Shocks, 211bhp Chip, Baileys BOV, RaceTec FMIC, RS4 Hubs & ally Uprights with RS4 brakes.

How did u get that to turn Blue, thats pretty sick

__________________
2002 A4(B6) 3.0L Light Silver
Mods: De-badged, Lip Spoiler De-chromed grill
Future 19's, 20%, Lowered

Yeah, any LED should work, just don't mess up the anode(+) and cathode(-)

__________________

2004 S4 6MT black *just bought
99.5 A4 1.8TQM red and 17" A6 4.2 wheels *sale pending
97 A4 1.8TQMS silver & lots of mods *totaled
96 A4 2.8M black *totaled

Lot's of time and soldering.

__________________

2000 Audi A4 1.8Tq, AJL engine, manual, H&R Race springs & RS4 Shocks, 211bhp Chip, Baileys BOV, RaceTec FMIC, RS4 Hubs & ally Uprights with RS4 brakes.

Na. pulling the door panel isn't a huge deal. Just get an LED that is the same diameter as the one you're replacing. LED's are soooo low current draw that it should make any difference what you get as long as you can get it to fit. Go to www.allelectronics.com for a huge LED selection.

docurley, that is sexy!

__________________
just another day, another moment.