I have a4 qauttro 98'. i just got 18' rims, and im looking for springs. ive decided on H&R lowering springs 1.9 in the front 1.5 in the back. It sounds good, and i noticed that the front of my car is higher then the back so it does make sense. I just wanna know if theres nething i need to be aware of before i buy them. The springs are made for my exact car, and im not going to buy shocks till a couple months. Anyone in southern cali know of a place other then dynamic that'll swap springs, i dont wanna pay 500.

__________________


audi 2.8 qauttro

clears corners
kamei grill
side markers
18' Flick rims (black) 225 Falkens
15% tint
waiting on springs

DIY. It's not difficult. 3-5 hours depending on tools and skills.

__________________

Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.

ya. but theres a place that charges 75 and im fine with that. BUt do you think the springs are good? H&R 1.9 in the front 1.5 in the back? its like 250 with shipping.

__________________


audi 2.8 qauttro

clears corners
kamei grill
side markers
18' Flick rims (black) 225 Falkens
15% tint
waiting on springs

2 inches is a serious drop.
I'd be careful if you're considering upsizing your wheel/tire combo - rubbing will be at risk.
Your control arms will be stressing, too.
What are the spring rates on this package? That's also an important factor.

__________________

Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.

i dunno. but there is one that is 1.25 and 1.00 drop

__________________


audi 2.8 qauttro

clears corners
kamei grill
side markers
18' Flick rims (black) 225 Falkens
15% tint
waiting on springs

anyone have the eibach 1.4 in the front and 1.3 in the back on 18's with 225 tires? Theres also the 1.25 in the front and 1 in the back H&Rs? which would be better?

__________________


audi 2.8 qauttro

clears corners
kamei grill
side markers
18' Flick rims (black) 225 Falkens
15% tint
waiting on springs

Not Eibach.
Go with the H&R.
I think you'll get both cosmetic and performance benefit if you go with the less agressive 1.25 and 1.00 setup.

Still... check what the spring rates are before signing away your money; you don't want to go too soft or too hard.

__________________

Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.

hey what does this mean (Audi A4 Sedan, Quattro B5 2.8L -11/1994 10/00)... the 11 and 10 what does that stand for. Im guessing the years for this part are 1994-2000, right?

__________________


audi 2.8 qauttro

clears corners
kamei grill
side markers
18' Flick rims (black) 225 Falkens
15% tint
waiting on springs

month

__________________

Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.

Get the H&R w/ 1.25f and 1.00r and get the bilstein shocks w/ grooves. That way you can lower it a bit more.

__________________
1999.5 A4 1.8T Quattro - Tip
Silver
STOCK