98golda6q
06-26-2007, 12:42 PM
hey guys... i bought a remus exhaust ststem (used) that is all the way from factory pipe back. the car it came off of was an 02 Jetta 1.8 T. i have a 98 A6 2.8...
is there some lucky chance it will bolt up and fit?
if not i'm just gonna cut the muffler and tailpipes off and have them welded on but i wanted to check with you guys first.
i'm pretty sure i'll have to cut the plastic underneath the rear bumper as to allow for the twin pipes to come through, so i'm ready for that... any tips on making that a smooth operation?
thanks a lot guys in advance for all your help.
i have attached pics for any of you guys that can do the "naked eye" look...
local://upfiles/27882/4B2FA5E586CB4EB386E03D565CDE06E7.jpg
local://upfiles/27882/62A0947D2159494B9BCE6EACFF9E486B.jpg
local://upfiles/27882/E84C67586FD64A42936EA025BC4D0D18.jpg
local://upfiles/27882/8DC59BF6A14D4A22B5BC40FAD2231B6A.jpg
is there some lucky chance it will bolt up and fit?
if not i'm just gonna cut the muffler and tailpipes off and have them welded on but i wanted to check with you guys first.
i'm pretty sure i'll have to cut the plastic underneath the rear bumper as to allow for the twin pipes to come through, so i'm ready for that... any tips on making that a smooth operation?
thanks a lot guys in advance for all your help.
i have attached pics for any of you guys that can do the "naked eye" look...
local://upfiles/27882/4B2FA5E586CB4EB386E03D565CDE06E7.jpg
local://upfiles/27882/62A0947D2159494B9BCE6EACFF9E486B.jpg
local://upfiles/27882/E84C67586FD64A42936EA025BC4D0D18.jpg
local://upfiles/27882/8DC59BF6A14D4A22B5BC40FAD2231B6A.jpg