So i bought Koni Coilovers used and they are in great condition. I am wondering what parts should come with the set and what tools i will need to install them. The reason i ask is because there are no tops to the set so i will have to compress the springs to put them on the shock. Do i use the stock hats or tops or w/e they call them?

[IMG]local://upfiles/21786/2E0D6F9256614863932EC702A5A7F35A.jpg[/IMG]

[IMG]local://upfiles/21786/A32EDD7FFCBE4754BDC0BA66BFB1293C.jpg[/IMG]

__________________

You will use the stock top plate, bumpstop, and rubber thing that goes above the plate. You will need the tool to adjust the coilover height.

You can use a spring compressor to install the springs onto the shocks, or you can lower the adjusters all the way down, pull the shock completely out, then put the nut on. I can't really see but you should have locknuts that come with that set.

yea they are all attached to the threaded rods. the tool to adjust i also have. How good is it to use the stock top rubber peice and boot? Will they give me a problem a week down the line?

__________________