Hi all, Quick question regarding bluetooth. I have a new LG VX8300 phone . 2007 RS4 with no cell phone cradle. Upon attempting to have my phone connect to the car, it says no devices found..The phone manual shows compatability with Audi's Bluetooth interface. Is there a step that I am missing? Do I need to do something within the telephone menus of the MMI.. I did not see any such options... Any and all suggestions would be greatly appreciated. Thanks in advance.
_____________________________
2007 Audi RS4 2006 Audi A8L 2004 Mercedes-Benz CL55 AMG
I have a lg8600. You need to dial 0000 before you search for the new device. that is the phone key code and it is not listed anyware. I obtained it from the verizon store after I had a similar problem. It worked ok after that. As a aside, I had to replace my bluetooth with a updated unit as it continued to default to maximum volume every time i turned off the car. Hope you donot have the same issue. If so write back and I can give you more info.
Thanks for the response and pardon my ignorance, but could you tell me in detail what you mean? Do i dial 0000 on the phone, push send and then try to find new device? Could you list in detail the steps I need to go through? thanks again
_____________________________
2007 Audi RS4 2006 Audi A8L 2004 Mercedes-Benz CL55 AMG
From MMI: Try Tel/setup/bluetooh PIN: try 1234 if the 0000 doesn't work. Both PIN codes from your phone and MMI Bluetooth need to be entered as the same on each device. I just re-hooked mine up because my last phone broke. I have a Treo 700 and there are a couple of steps on the phone you probably need to do. The MMI is the easy part, just make sure you have the right PIN and use the same for the phone. On your phone, you probably need to make sure the bluetooth is on, then make "this device discoverable to others", Then scan for other bluetooth devices. If your phone asks you for a PIN make sure it's the same entered in on the MMI bluetooth setup. This is all I can say, since it's the way I did it on my Treo 700. It was easy once I remembered my first bluetooth PIN I made when i first bought my RS4. Again, it's the phone that you need to navigate a few steps to turn on bluetooth, partner it up with MMI device, then connect the two and use the same PIN. The MMI is the easy part. Good luck.
Go to the bluetooth menu and the screen that says search for new device. Then enter 0000 and then search for the device(hit ok after you have entered the 0000) When it locates the audi device it will ask for the audi code. Enter 1234 and it should link.
cool, glad it worked for you. I'm not sure if the phone book will work 100% if you don't have the cradle, but let us know if it does. I'm still trying to figure that one out too.
Printable Version
Bluetooth question - 
