I just purchased a new momo shift knob to replace the stock one and i removed the plastic case around the boot to expose the shift lever, but the shift knob does not unscrew or anything i'm not sure how to get it off without ripping or tearing occuring? someone please help, my vehicle is 2005 a4 1.8t 6 =speed, thanks for the help....
===========================
Welcome to Audi Forums seth1005!
Since you're new... check out the START HERE! (click this link) link to get a rundown of the lingo/vocab here at audiforums.
Then be sure to search the archives when you have a question. Chances are the question has been asked before (probably several times) and the archives will have plenty of information to answer your question. If you still need answers, please feel free to ask questions.
Don't feel intimidated; we are all a bunch of pretty cool guys (and gals). Feel free to post advice, comments, ideas, suggestions, and even pics.
================================================== ==========================================
__________________
Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.
http://www.fourtitude.com/resources/...091203_1a1.pdf on that link if u scroll down to page 4 of 20 towards the bottom it says To remove the shift knob you must cut the clamp holding the shift knob we have included? is this true is theree something i need to cut or should i just stop being a pu$$y and unscrew it harder? i'm just afraid it'll completly break off?
I CAN see what they are talking about, though.
Under the boot, at the top of the shaft, there is a small hose clamp. It needs to be snipped with cutters.
Can you see it in the photo?
__________________
Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.
You should have a replacement clamp with your SS kit. Do you have a kit or are you just trying to get the knob off on your own? If you don't, then yes, you will need to buy a new clamp. Audi uses one-time clamps. They have to be cut off. A replacement hose clamp will obviously have the screw to tighten it down or to loosen it.
__________________
Either lead, follow, or get out of the way...
Audis don't get out of the way and they never follow.
Not sure what the SS kit really is? and yes i am trying to get the knob off on my own and if i do need to buy a new clamp do i just go to audi and ask them for another one ? and after looking at my car in the light with the boot and plastic cover up i dont really see what i need to snip , i'll upload a picture later on so maybe ytou can point it out easier to me because i'm obviously a dumba$$
Help changing shift knob??
