|
Batteries -> RE: Milltek or Awe pipes (2/20/2008 11:44:55 PM)
|
quote:
ORIGINAL: motoxxx54321 What about the power difference. I herd that you have to be careful with aftermarket exhuast because they flow more. I was told that a turbo needs to have good backpreasure. otherwise the bottom end will hurt but the top will improve a little. Nah. That's a common misconception. Non-turbo motors generally benefit from some backpressure, because you lose some low RPM torque if you don't have *any* backpressure. Turbo motors (this applies to supercharged cars, too) do NOT have this same problem. I repeat, they do NOT have this problem. The less restrictive the exhaust for turbo/supercharged cars, the better. It would be ideal if there was no exhaust at all, in fact, but that's just ridiculously loud and illegal. The less restrictive your exhaust is, the faster the turbo will spool, and the faster the power will kick in. Both AWE and Milltek are good choices, by the way. Milltek will most likely be a little quieter. Milltek tends to be a little more subdued, and alot of people like that.
|
|
|
|