cam/crank sensor Q (Full Version)

Audi Forum >> Audi Models >> All Other Audi Models

cam/crank sensor Q

  

ich_hasse_AUDI -> cam/crank sensor Q (11/7/2007 3:08:55 PM)

hello everyone. i bought a 93 cs quattro for a song and dance w/ blown head gaskets(suprise). rebuilt whole motor and replaced all gaskets etc and a few sensors- now i see the cam sensor has age/heat cracks. i just bought a crank sensor 4 $130 due to oil pressure blowing oil into the harness(suprise). will this DME let the motor start of the crank sensor alone? it wont start and im tapped out. thanks

  
InExile -> RE: cam/crank sensor Q (11/7/2007 8:10:12 PM)

how is the timming

ich_hasse_AUDI -> RE: cam/crank sensor Q (11/8/2007 8:05:51 AM)

the timing is set to cyl 1 TDC with the cam bar and crank marks (cover and pulley) lined up

ich_hasse_AUDI -> RE: cam/crank sensor Q (11/8/2007 8:08:23 AM)

(basically i have compression and its interference so the timing must be right...right?)

InExile -> RE: cam/crank sensor Q (11/10/2007 11:57:50 PM)

it still could bee of enough not to start .. or 180deg off

techbod -> RE: cam/crank sensor Q (11/11/2007 12:59:19 AM)

timing set up ( engine size is always good to know ) but 1 cylinder head ? I guess its a 2.2 or 2.3
#

[image]local://upfiles/12092/73DBFFBE7C464EFFBC2BD464248ABCA3.jpg[/image]

ich_hasse_AUDI -> RE: cam/crank sensor Q (11/12/2007 5:14:25 PM)

its a 2.8 (6) cylinder

  

Page: [1]

Return to Audi Forums home page or view the Full Version of this page.