cam/crank sensor Q

Audi Forums Audi Classifieds Photo Gallery Calendars Search Recalls TSB's Contact AF Sponsors
Audi Lineup Audi News Forum FAQ AF Decals Audi Timeslips Register Login

cam/crank sensor Q

Printable Version

Audi Forums >> Audi Models >> All Other Audi Models >> cam/crank sensor Q

Page: [1]

Message

<< Older Topic Newer Topic >>

cam/crank sensor Q - 11/7/2007 3:08:55 PM

ich_hasse_AUDI

Posts: 6
Joined: 11/7/2007
Status: offline

hello everyone. i bought a 93 cs quattro for a song and dance w/ blown head gaskets(suprise). rebuilt whole motor and replaced all gaskets etc and a few sensors- now i see the cam sensor has age/heat cracks. i just bought a crank sensor 4 $130 due to oil pressure blowing oil into the harness(suprise). will this DME let the motor start of the crank sensor alone? it wont start and im tapped out. thanks

Post #: 1

RE: cam/crank sensor Q - 11/7/2007 8:10:12 PM

InExile

Posts: 854
Joined: 3/1/2006
From: Black Mountain, NC
Status: offline

how is the timming

_____________________________

I can't help you, i don't have any money.For other questions click here

(in reply to ich_hasse_AUDI)

Post #: 2

RE: cam/crank sensor Q - 11/8/2007 8:05:51 AM

ich_hasse_AUDI

Posts: 6
Joined: 11/7/2007
Status: offline

the timing is set to cyl 1 TDC with the cam bar and crank marks (cover and pulley) lined up

(in reply to InExile)

Post #: 3

RE: cam/crank sensor Q - 11/8/2007 8:08:23 AM

ich_hasse_AUDI

Posts: 6
Joined: 11/7/2007
Status: offline

(basically i have compression and its interference so the timing must be right...right?)

(in reply to ich_hasse_AUDI)

Post #: 4

RE: cam/crank sensor Q - 11/10/2007 11:57:50 PM

InExile

Posts: 854
Joined: 3/1/2006
From: Black Mountain, NC
Status: offline

it still could bee of enough not to start .. or 180deg off

_____________________________

I can't help you, i don't have any money.For other questions click here

(in reply to ich_hasse_AUDI)

Post #: 5

RE: cam/crank sensor Q - 11/11/2007 12:59:19 AM

techbod