88 QT 5000 power mods!!! (Full Version)

Audi Forum >> Audi Models >> All Other Audi Models

88 QT 5000 power mods!!!

  

kotabmx -> 88 QT 5000 power mods!!! (12/6/2007 7:09:34 PM)

i need anything thing and everything i can do this car!!!!
1988 quattro turbo.
turbos, fuel mods, computer! tell me what to do!!
i got lots of cash no idea where to start!!
if can email me at kota_bmx_16@hotmail.com
thankyou!!!

  
Yentemad -> RE: 88 QT 5000 power mods!!! (12/7/2007 5:27:06 PM)

i would say go EFI, chip the ecu with the qlcc chip, BPV, boost control valve, stiffer wastegate spring, go 3 in with the exhaust, maybe buy replacement springs to lower the car

Reckless_Kelly -> RE: 88 QT 5000 power mods!!! (12/7/2007 7:35:14 PM)

Start by sending me some of that cash, and then go check out the project page at www.motorgeek.com, and then go shopping at www.034motorsport.com

EFI setup with a bigger turbo and better exhaust is the way to go for max HP with a 10v motor, and then there's always the 20v motors.

kotabmx -> RE: 88 QT 5000 power mods!!! (12/9/2007 11:26:11 AM)

Thank you! excellent site(034). Couple more questions, this is the 10v motor, right?
and whats the I5??? I am very experienced with cars, but audi's are greek to me.
what would be the bet set-up for 2000 grand? your help is much appreciated.
and how much will the head hold till I need to do head studs and gasket if I raise the boost?
and turbos, any ideas there??? Thank you thank you!!!

Reckless_Kelly -> RE: 88 QT 5000 power mods!!! (12/10/2007 5:50:36 PM)

I5 = Inline 5 Cylinder as opposed to I4, I6, V6, or V8

The motor and stock turbo can handle about 250-275 hp before you need to really start beefing things up. The CIS fuel injection that comes on the cars works until about 220 hp, then you need to go with a stand alone and EFI setup from either 034 or Megasquirt. If you plan on going for 250+hp, don't even waste your money on anyhting for the CIS, start out with an EFI setup and tune from there. There are a few bolt on turbo upgrades that will put you in the 300hp range, but you should build the motor with ARP studs and some stronger rods before getting that far into it. If you really want to go crazy, there are some people who have built 450hp 10v motors with HUGE turbos and water/meth injection, using custom intake and exhaust maifolds and front mount intercoolers with CO2 coolong. Buyt they aren't really streetable cars.

kotabmx -> RE: 88 QT 5000 power mods!!! (12/10/2007 6:56:10 PM)

much appreciated. let me get this straight, say i do the stand alone EFI, ok about how much power would that put me at?

and then say a moderate turbo. would that be going to far for the rods and head gasket to hold??? I mean sure the rods would hold out before the head, but how much more.
I just really dont want to do a tear down on an engine right now. Head i can deal with, I put studs on 1000 horse power cummins, but taking out an engines are a pain in my A$$

So what would you do Kelly, 2 grand, want to be streetable, with out tearing into engine. reliable. And sorry for being so picky, i want this right the first time.

thanks again!!!


kotabmx -> RE: 88 QT 5000 power mods!!! (12/10/2007 7:00:34 PM)

Oh and by the way i put www.Megasquirt.com and turns out thats not the one you were talking about...i think lol

Audi 90Sport Quattro -> RE: 88 QT 5000 power mods!!! (3/28/2008 11:46:48 PM)

I had the QLCC chip and made the WG adjustable, 3" piping and remus exshaust....way much fun.

b_t_r5000 -> RE: 88 QT 5000 power mods!!! (3/29/2008 12:49:35 PM)

it would also be handy if you did a custom Spectre intake with a K&N filter, and upgrade the brakes so you have 2 pot calipers all around so u can stop as fast as u got going. Also for oil changes might I suggest Castrol Syntec? The reason all this stuff is so cheap is because everyone in my car club (Budget Touge Racing) has only cheap [yet effective] mods done to their rides.

  

Page: [1]

Return to Audi Forums home page or view the Full Version of this page.