i found previous posts about this but they were people looking for them, so i hope i'm not repeating.
i bought an upper front strut bar for my "98 2.8 a4, but it doesn't seem to fit quite right...
i might just be screwing something up but it seems like the break fluid container is in the way.
It might just be that it sits right on the back of it but if anyone has expirence with this, i'd love to know what to do!

thanks!

__________________
'98 A4 2.8 Quattro

K&N Intake
RS4 Grille
Trunk Lip Spoiler
Clear Side Markers
Replaced Lower Grilles
Exhaust Tips
Painted Calipers

which manufacture do you have, i know diff manufactures have different designs of the strut bar. I have a LLtek and have no fitting issues. i also have a00,1.8T.

__________________
PUNK IN DRUBLIC
2000,A4 1.8TQM,APR 91,APR R1,Labree HFC,Techtonic exhaust,Koni coilovers, B&M ss,APR snub,18X8 B7 RS4 reps.RS4 grill,Lip spoiler,VDO boost gauge.Spec lwfl,Spec Stage 1 clutch

it's probably not that good but i got it on ebay

http://cgi.ebay.com/ebaymotors/ws/eB....cWON.m313.lVI

does your's got straight across? because as you can probabl tell, this one curves back toward and over the battery. I could probably get this one to fit, but i'm just worried about it putting unwanted weight or pressure on the break fluid container...

thanks for the help!

__________________
'98 A4 2.8 Quattro

K&N Intake
RS4 Grille
Trunk Lip Spoiler
Clear Side Markers
Replaced Lower Grilles
Exhaust Tips
Painted Calipers

http://www.lltek.com/images/suspensi..._LLB5_14_Z.jpg

this is the one i have, its completly different then the ebay.

__________________
PUNK IN DRUBLIC
2000,A4 1.8TQM,APR 91,APR R1,Labree HFC,Techtonic exhaust,Koni coilovers, B&M ss,APR snub,18X8 B7 RS4 reps.RS4 grill,Lip spoiler,VDO boost gauge.Spec lwfl,Spec Stage 1 clutch

is your ebay one adjustable?

__________________
PUNK IN DRUBLIC
2000,A4 1.8TQM,APR 91,APR R1,Labree HFC,Techtonic exhaust,Koni coilovers, B&M ss,APR snub,18X8 B7 RS4 reps.RS4 grill,Lip spoiler,VDO boost gauge.Spec lwfl,Spec Stage 1 clutch

well the one i have is pretty close to that, it just looks weird in the pic.
in the pic of mine it just looks weird because its adjustable and its twisted in the pic, otherwise it looks just like yours but without the straight bar between the two mounts. I guess i'll just have to try putting it on but i'm still not sure its right...

thanks again!

__________________
'98 A4 2.8 Quattro

K&N Intake
RS4 Grille
Trunk Lip Spoiler
Clear Side Markers
Replaced Lower Grilles
Exhaust Tips
Painted Calipers

any lucky of getting it on yet??

__________________
01 Audi A4 Quattro, Mystery chip, Abd intake, Bilsten sports, H&R springs, Neuspeed front and rear sways and exhaust, Atp test pipe, JHM linkage, complete rs4 body kit, 18" Falkens, Nitto invo tires, Forge 007 and unos Mbc, 034 street trans mounts.

You don't need it. Just sell it again on eBay. Unless you want your car to understeer even more, don't install it.

__________________

^+1 your car will handle better with out it. STB promote understeer which is why they are popular on rear wheel drive cars. You car has enough understeer already

__________________
God blessed me with ability to get an Audi
its simple math..... 4 > 8 when it comes to # of cylinders
2001.5 1.8TQM
Mods= Diode mod, Kand N, Forge 004, exhaust, test pipe

And Civics, because ricers know less about suspension than they do about driving, which is scary.

__________________