|
View Full Version : What Diverter Valves To Use? Airf22 05-16-2005, 12:10 PM Hey, For a 2001 a6 2.7t will a forge race dv fit or do i need the forge 007 "a line". Which one is the better one? Or which brands do you guys recomend that will fit easily, and give the best results with the best sound not using bov? Frost GST 05-16-2005, 08:58 PM Yes, the race diverter will work. The 007 is a piston design where the race valve is a diaphram like the stock valves. You can customize the spring rates on the race valve to adjust the responsiveness. As far as which one is better that is all opinion, both are much better than stock valves. Andy audi_first 05-16-2005, 10:51 PM If you don't drive too hard and want to save some money, take a look at the 710N diverter valves from Audi TT They are like $35 a piece. Airf22 05-17-2005, 02:14 AM I do intend on pushing it sometimes and would like the better performance ones, also if one makes a nicer sound? Airf22 05-17-2005, 02:15 AM oh i forgot to say i have the APR chip so it has more boost audi_first 05-17-2005, 04:36 AM ORIGINAL: Airf22 oh i forgot to say i have the APR chip so it has more boost in that case, go with forge Airf22 05-20-2005, 02:54 AM Question still stands, which one is better for sound and performance? rs 05-20-2005, 03:09 AM far as i know, there isnt one better in preformance. couldnt tell you sound, ill let someone with more knowledge tell you that Frost GST 05-20-2005, 01:27 PM If you are going to recirculate the valve and keep the stock air box system then there will be no or very little change in sound from any valve other than a BOV which dumps the air to the atmosphere instead of recirculating it. Of course this set up will cause a rich condition between shifts and could cause stumbling problems. When changing to an aftermarket DV there will be a very small increase in performance of the car due to the new valves ability to hold higher boost pressures and its better responsivness. But the difference in performance between one aftermarket valve and another is too small to measure. Andy Lyrad576 05-25-2005, 12:40 PM Where would one find the Forge race DVs at? I am looking to chip soon and would like a fair priced DV to upgrade to. Thanks! skidplatexa4 05-25-2005, 02:40 PM As far as sound goes they all are about the same for a DV. They do make a combo blow-off/ diverter if you are looking for sound, but they are still newer and I really have'nt heard much about them on our audi's. I would go with the Forge glennpat 02-09-2006, 05:42 PM Try this... http://www.stratmosphere.com/forge_valves3.htm |
|