Hi,

I bought one of those cheap cables from ebay, until i get the money for the real one. I installed the program. I installed the drivers.

I have software 409. Now i ran into some problems. I have the impression that i do somthing wrong. On COM 3 the program display the follow message

Port Status: OK
Interface: Found
Type: Serial pass Through
Opto/Iso: No
Ross Tech design: No

So help would be appreciated.

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID

who did you buy it from?

__________________
01.5 2.8qm: Custom CAI, 18" Hp Lightning on 245/40/18 Kuhmo Ecsta MX, CC mod, tinted tails, 2x 12" Jensen sub with a 300 watt Bazooka Amp, Asian driver....

it should look like this if the cable isn't plugged into your car




try switching it to COM 4 instead of COM 3 and it should fix it

__________________
NOOBS CLICK HERE

BT YOUR A4

I bought the cable ffrom szhid.

When i select the USB I have a message with Interface not found. Its something with the conection.


Do i have to buy the program from ross tech in order to make this work? I only DL the program from them.

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID

I would buy the program in order to make this work. But i need to be sure that this cable will work on the car before i activate the program.

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID

did you try switching it to COM 4?

__________________
NOOBS CLICK HERE

BT YOUR A4

yeah, no results

Is there a way to see(test) those COM ports somwhere?

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID

Try using version 311.2. Also make sure that your COM ports 3 and/or 4 are actually open and available.

__________________
2001 A4 1.8TQT *GIAC ECU Flash *GIAC Tip-Chip *ITG Filter *Bailey DV *VDO Boost Gauge *OEM S4 Wheels *TurboXS HPBC *Stern Snub Mount

how do i chack that?

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID

In my device manager i can only in the Ports section only COM1 and LPT1...this means that i have no other ports availble?

__________________
No its not the audi in the picture!!

Audi 2000 1.8TQM Black, Zimmermann BBK , GIAC, ATP test pipe, Forge 004, K&N drop-in, 6000k HID