ABS & Brake light - Have a Code (Full Version)

Audi Forums >> Audi Models >> Audi A6

ABS & Brake light - Have a Code

ThePizza -> ABS & Brake light - Have a Code (2/5/2008 1:07:50 PM)
Okay, so my car started displaying the ABS and Brake light and beeping three times. I just got the VAG-COM cable I ordered off of Ebay and plugged it in. The ABS controller doesn't seem to respond, but the engine controller is giving the following code: 18014 - Rough Road/Engine Torque Signal from ABS: Electrical Malfunction P1606 - 35-00 - - I figured I had a failing ABS unit, but now I am even more confused. Can anyone tell me what might cause this P1606 code?

dankhound -> RE: ABS & Brake light - Have a Code (2/5/2008 8:22:23 PM)
Still sounds like a bad abs control module. The ecm just isnt seeing a signal it expects to see from the abs since the abs control module is dead so it throws a fault for a bad signal.

auditech79 -> RE: ABS & Brake light - Have a Code (2/5/2008 8:39:01 PM)
Yes that fault code is usually thrown when a faulty ABS module is present. The only other cause would be a faulty IAT sensor, which really isn't plausible.

ThePizza -> RE: ABS & Brake light - Have a Code (2/6/2008 9:29:17 PM)
Alright, thanks guys. I am going to ship this off to modulemasters.com and see what turns out. I'll let you all know!

dcdesign2000 -> RE: ABS & Brake light - Have a Code (4/23/2008 1:58:35 PM)
Any luck with the ABS Module? My friend's 4.2 is beeping with ABS & Break lights after he drives on the road for 15 minutes. Then it beeps again and goes away in 15 minutes. I wonder if he has the same problem. Any suggestion? Thanks!

Page: [1]

Return to Audi Forums home page or view the Full Version of this page.