been lurking on here for a few months now havnt posted pics yet because i still have a bunch of parts to put on. I got my brakes on the other dy so i decided to put some pics up.
http://i17.photobucket.com/albums/b76/NJP17/DSCI0001.jpg
http://i17.photobucket.com/albums/b76/NJP17/DSCI0001-1.jpg
http://i17.photobucket.com/albums/b76/NJP17/DSCI0003.jpg
http://i17.photobucket.com/albums/b76/NJP17/DSCI0002.jpg
http://i17.photobucket.com/albums/b76/NJP17/DSCI0003-1.jpg
http://i17.photobucket.com/albums/b76/NJP17/DSCI0002-1.jpg

very sharp man, like the stance you got.. how much those brakes run you

they retail for $2200 but i have a wheel/tire customizing shop s i get stuff faily cheapORIGINAL: krelly

very sharp man, like the stance you got.. how much those brakes run you

very nice!

So sick! That's a really nice setup.

Congrats on the new brakes. Looks great.

thanks for the comments. i still have a oettinger trunk spoiler and some stereo stuff to put in.

Looks great!

I amcurious about your wheel/tire setup and what suspension mods you've done. I've been trying to decide if I want to go lower on my car, or if I just need 18s/19s to make the wells look more filled.

More details please!

Damn, very clean ride. I LOVE it!! Whats the size of those wheels and what kind of drop is that?

the wheels are 19x9.5 on 265 30 19 tires the trick with the 4.2s is to get a 3 piece wheel or to find a one piece wheel with the proper offset for the widebody. i have seen several 4.2s with with wheels with the wrong offset and i think it looks horrible. even with spacers most 19" 5x112 one piece wheels are to narrow for the 4.2.i have h&r full coilovers and thats it, for the suspension. it still has plenty of room to go lower.
i will lower the back a bit more once i get my stereo stuff in

i like the accents on the bottoms of the doors that the 4.2 n teh s6s have vs teh skinnier smaller less noticable ones my 2.7t has ... i was thinking about fiberglassing some but if i can order them from audi direct and they will fit itll beat screwin around with fiberglass ... does anyone know if they will fit?

I got the 4.2 door blades, they fit with no problems, bolt right on. YOu can get them for 290-300 for the set of 4.
No need to do fiberglass pieces.
Don't get them from Audi, they'll rip you off. ECS tuning sells them or clairparts for 290...

NJP17 - nice ride, love the break upgrade and the HREs! Nice choices.

ORIGINAL: Khardysius

Looks great!

I amcurious about your wheel/tire setup and what suspension mods you've done. I've been trying to decide if I want to go lower on my car, or if I just need 18s/19s to make the wells look more filled.

More details please!


Hey
I think you should lower it to get the right look, especially since you want the wells to look more filled.
Brice

how do i remove the old door blades ...do i have to take the door panel inside off?

NO removing door panels or anything. The blades are attached to the door with two small screws each, which are located inside the door but BELOW the interior panel, near where the door meets the door seal.
Remove each screw, holding the blades flat, slide them to remove them.
There is a write up with pics on AW. Took me 30 minutes b/c two took a little bit of elbow grease. Easy mod.
Just get the S6/4.2 blades and get them painted and pop them on! You might be able to get used ones on line on Shokan.com or Ebay or forum.... But new they are right under $300.

i have a extra set of silver 4.2 door blades off of a 2001 i will sell them for $190 shipped in the us. if anyone is interested or local pickup in northern california is possible too

ill take em

how u want me to pay

ORIGINAL: joetm

ill take em

how u want me to pay

I replied to your email. Let me know what you want to do.
I have tons of parts for a 2001 a6 4.2 mostly interior parts i purchased and dismantled a wrecked one and have a bunch of misc parts so if anyone else is interested in anything let me know and ill see if i have it.

I'm looking for a lid for the center console armrest. I have the dk blue interior.

Thx

Well this turned into a highjack. Really nice ride, I'm sure you get complements on it daily. NICE JOB.

hi saw ur post i just purchased a 2001 a6 4.2 nav the works
do u still have the parts u mentioned on ur post if so i need the sunshade rear automatic braket
owners manual the knob for the nav if u have it the controlbox for the mirrorsfor the mirrors what color interior?

So njp17, how hard was it to put the Audi Navigation System on your car? How much did it cost?

ORIGINAL: saintforlife

So njp17, how hard was it to put the Audi Navigation System on your car? How much did it cost?
still havnt got it to work properly. it doesnt power on or off with the ignition and only the rear speakers are working at the moment. i am going to order a new harness off of navplus.us and use the jl audio clean sweep. i already have some amps, subs and interior speakers.

ORIGINAL: 4.2a6

I'm looking for a lid for the center console armrest. I have the dk blue interior.

Thx
i have a black lid but i need to check to make sure the latch is good i know the latch is not working but i do not know if the lid or the bottom part is broken ill take a look this thursaday. i am out of town at the moment.

ORIGINAL: inia6

hi saw ur post i just purchased a 2001 a6 4.2 nav the works
do u still have the parts u mentioned on ur post if so i need the sunshade rear automatic braket
owners manual the knob for the nav if u have it the controlbox for the mirrorsfor the mirrors what color interior?
sunshade i used,nav knob i used,didnt take the mirror control box. the interior is black.

door blades are sold to joetm. joe i will get them out as soon as i get back in town its looking more like wed or thurs now.

Is the central locking unit still available?

sent you a pmORIGINAL: dmfbm

Is the central locking unit still available?

joe got the door blades out today. sorry for the delay, the last few days have been hectic. also sent you an email with the tracking number.