Go Back   AudiForums.com > Audi Models > Audi A4 > B7 Models


Reply
 
Thread Tools
  #1  
Old 03-20-2008, 12:49 PM
KBIGGZ KBIGGZ is offline
Junior Member
 
Join Date: Aug 2006
Location:
Posts: 23
Default Change Drawer in Dash busted during AVIC D3 install....what to do?

Guys -

I hired a dude to install my Avic D3 into my 06 Audi A4 (more on the Avic stuff in a sec) and the sole casualty was that he busted my change drawer. Maybe it's not called the change drawer, but it's that compartment next to the hazard light that opens and closes nicely. Put what you want in there...

What's busted was the spring that operates it. He simply told me, "I broke the spring, I'll get you a new one, and fix it ASAP." I know he's not gonna come back for just that - so I'm interested in knowing what my options are. I've not messed around with it, tried to take it out, or anything yet.

Is there really a spring that I can replace and get this thing running again? Can I order JUST the spring, or am I going to have to buy the whole assembly for some ridiculous price? What's the best thing to do here?

Thanks for that -

The AVIC installation went OK, but I was left with a NASTY NASTY hum from the rear speakers when the unit was on, and it got louder when I turned on the headlights. After two hours of screwing around in there last night I figured out that he hadn't connected the negative wires to the rear speakers (and amp) so once I connected those the hum went entirely away.

I now have the AVIC D-3 hooked up with the Bluetooth adapter, and the iPod adapter. I added a small amplified bazooka sub in the trunk to round out the bass. I've used the AVIC for a year in my last Audi A4 (2004) and I really like it. The bluetooth is new for me, and works really well - downloaded my entire phonebook to the unit from my blackberry in a minute. It automatically pairs with my phone when I enter the car.

If anyone needs assistance in troubleshooting an AVIC d3 install - let me know. I've done this twice now, and pretty much have had problems everywhere. I'm really glad to have it all working. Now if I can only get the change drawer fixed....


KB

__________________
Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Audi Forums!
  #2  
Old 03-20-2008, 03:05 PM
ocadam ocadam is offline
Senior Member
 
Join Date: Jun 2007
Location: San Diego
Posts: 1,679
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

The install on that drawer cant be easy. You should probably call the dealer and ask them what you have to do and what the price is. Or if the car is under warranty see if the warranty covers it.
__________________
Toyota 4 runner
Reply With Quote
  #3  
Old 03-22-2008, 03:22 PM
fumando fumando is offline
 
Join Date: Jan 2008
Location:
Posts: 34
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

If the guy buys you a new drawer, will you sell me your broken one? Mine was scratched when I bought the car and it looks like crap, especially at night. I think to get it out, you remove the trim piece. There's a diagram somewhere...I'll try to find it.
__________________
Reply With Quote
  #4  
Old 03-24-2008, 09:35 AM
meeksy5 meeksy5 is offline
Junior Member
 
Join Date: Mar 2008
Location:
Posts: 19
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

I'd be interested in hearing more about the Avic install. I'm looking for an aftermarket nav, bluetooth and ipod unit. You can pm me with details if you get a chance. Thanks.
Reply With Quote
  #5  
Old 03-26-2008, 01:09 AM
silveraudi2 silveraudi2 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 21
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

im getting my avic- d3 installed tomorrow by bestbuy

this kinda makes me nervous about the guy breaking my drawer now
did you get a custom trim kit for it or somethign or did it just pop in?
Reply With Quote
  #6  
Old 03-26-2008, 09:12 AM
meeksy5 meeksy5 is offline
Junior Member
 
Join Date: Mar 2008
Location:
Posts: 19
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

SilverAudi,
Let me know how you like your Avic. How much did Best Buy charge for the install?
Reply With Quote
  #7  
Old 03-26-2008, 08:08 PM
silveraudi2 silveraudi2 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 21
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

just got it installed!

usually the charge 155.36 but i became kinda tight with those guys and we had some fun so they decided to give me a discount for 105.00 and a bunch of free stuff so it wasnt too bad

its actually a pretty good system... i dont have the navigation dvds and my friend told me there still in his garage so i hope he's being honest cause there like 180 to replace.
also i think i need to get subs for it
the stock system put out more bass than this system
Reply With Quote
  #8  
Old 03-26-2008, 10:23 PM
meeksy5 meeksy5 is offline
Junior Member
 
Join Date: Mar 2008
Location:
Posts: 19
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

$105 ain't bad at all. Did you have the iPod and bluetooth adapters as well? I'm sure that would raise the cost. How do the steering wheels controls work? And last one...what mounting kit did you use? Thanks for the info.
Reply With Quote
  #9  
Old 03-27-2008, 12:50 PM
silveraudi2 silveraudi2 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 21
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

the steering controls dont work( they said it was impossible especailly cause there the spinning type not buttons)
and the system doesnt turn on anymore without the keys but i mean its a touchscreen so its ok =)

right now i just got it installed and i could not find a dash kit for the car at all so i had to get one custom made and molded =(

and your welcome man... dont hestitate to ask any questions
its kind of a big thing so i understand
Reply With Quote
  #10  
Old 03-27-2008, 02:37 PM
meeksy5 meeksy5 is offline
Junior Member
 
Join Date: Mar 2008
Location:
Posts: 19
Default RE: Change Drawer in Dash busted during AVIC D3 install....what to do?

Did you consider the Metra kit? I've seen it used on a few B5's, so it should work for most. Thanks again for the info. I may hit you back up if I get closer to a decision.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering
All times are GMT -4. The time now is 08:26 AM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.