Audi Forums Audi Forum
Audi A4
Audi Forums
Audi Forums   Audi Classifieds   Photo Gallery   Calendars   Search   Recalls   TSB's   Contact AF   Sponsors
  Audi Lineup   Audi News   Forum FAQ   AF Decals   Audi Timeslips   Register   Login

Hazards work/blinkers dont

  Printable Version
Audi >> Audi Reviews >> Electronics >> Hazards work/blinkers dont Page: [1]
Login
Message << Older Topic   Newer Topic >>
Hazards work/blinkers dont - 3/25/2008 9:06:46 AM   
GoldenGluv


Posts: 20
Joined: 3/24/2008
From: Boston, MA
Status: offline
My blinkers have been sporatic for the past few months. when I turn either signal on, it will blink maybe 3 times at most before it just goes out; sometimes they dont blink at all!! Also, the "ticking" sound somtimes goes out of control when I signal. It can sometimes last for the duration of the ride. almost sounds like a pen down the teeth of a fine comb over and over. However, when I hit the hazard switch, the lights blink just fine. I just want to know how to fix it/ or who to take it to, any idea of the price for parts + labr. Has anyone had this problem? 


_____________________________



'03 Audi A6 2.7T Quattro (Current)
TIP /70,000 mi. /Stock

'01 Audi A6 2.7T Quattro(Totaled)
'91 Honda Accord (Fully Modded/Sold)
'89 Toyota Carolla (First whip)
Post #: 1
RE: Hazards work/blinkers dont - 3/25/2008 4:57:53 PM   
nvr_follow_a4


Posts: 27
Joined: 3/4/2008
Status: offline
Definetly the hazard switch. I had this happen to me about a month ago in my B5 A4, did some research in the forums, so I went to the dealer and paid like $40 for a new hazard switch and popped out the old in plugged in the new and it fixed the problem. I guess there are two resistor coils in the switch (one for hazards, one for blinkers) so that explains why your hazards will work, but your blinkers weren't. Easy fix.........

_____________________________


2004 A4 18TQM - Black on Black
http://www.cardomain.com/ride/3071762

(in reply to GoldenGluv)
Post #: 2
RE: Hazards work/blinkers dont - 3/29/2008 6:48:32 AM   
425nce

 

Posts: 1
Joined: 3/29/2008
Status: offline
i had the same problem, i replaced the hazzard switch and the problem was still there. i found the connector at the turn signal switch on the steering collumn was coming unplugged. i secured it back on and now everything works great. hope it helps.

(in reply to GoldenGluv)
Post #: 3
RE: Hazards work/blinkers dont - 3/31/2008 3:45:23 PM   
Chokingemu

 

Posts: 3
Joined: 3/31/2008
Status: offline
I just had this problem happen to my 87 GT. Both my turn signals and my "Electronic"s board with the Volts and Oil temp are out. I dismanteled the hazzard switch and it wasn't pretty inside so I'm hoping a replacment will cure the issue with the signals. On the flip side, my computer switch now works again after taking apart and cleaning terminals.

(in reply to 425nce)
Post #: 4
RE: Hazards work/blinkers dont - 4/7/2008 2:16:20 PM   
GoldenGluv


Posts: 20
Joined: 3/24/2008
From: Boston, MA
Status: offline
Bought the unit, installed in myself 3mins flat. Thanks guys. I love this effin' forum.

_____________________________



'03 Audi A6 2.7T Quattro (Current)
TIP /70,000 mi. /Stock

'01 Audi A6 2.7T Quattro(Totaled)
'91 Honda Accord (Fully Modded/Sold)
'89 Toyota Carolla (First whip)

(in reply to Chokingemu)
Post #: 5
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Audi Forums >> Audi Reviews >> Electronics
Jump to:

Featured Sponsors

Advertising Info

Top 10 Posters
cincytt14782
pandaxpress14480
techbod12715
onepoint8tee10838
jestnomen10682
awdaholic10051
badluckaudi9131
karl8984
chaos922878044
i3uddha7313

New Vendors
AMSOIL - Performance Oil Technology
Penske Audi West Covina
Royal Purple
GetCoolParts.com
K&N Engineering, Inc.


Honda CBR Motorcycles | Kawasaki Motorcycles

Audi Forums .com is not affiliated with or endorsed by AUDI AG.