Go Back   AudiForums.com > General > Off Topic




Reply
 
Thread Tools
  #1  
Old 03-29-2008, 04:48 PM
ThePaintballGuy ThePaintballGuy is offline
Senior Member
 
Join Date: Aug 2006
Location: Spokane WA
Posts: 4,771
Default Pioneer Avic D3 Install - FINISHED!!!!!

Ok well it's all in now!!!! Took me about 8 hours to do the total install from start to finish. I did run into a few problems but those were sort of my fault. One of them was that I was trying to run power to the bluetooh and XM receivers but I cut the wrong wires and ended up killing my ABS and Traction Control systems. LOL SO I had to go back and fix that and then just decided to run the wires all the way back to the front for power.

Needless to say it was all WAY worth it! This thing is SWEET! The navigation is cool and works well, sound it has is great! My Subwoofer is MUCH MUCH louder now compared to when it was in the car with the stock HU and I now have XM, IPOD, and Bluetooth in my car now! So now onto the pictures!


All the boxes of stuff.


Thats EVERYTHING that is going into the car! Yeah It's a lot!


Main wiring harness.


One of the cats (MAX) watching me work.


The bluetooth microphone. I installed it in the factory location by the sun-roof controls.


My counsel all torn apart.


All the wires STILL waiting to be put in the car.


I ran the bluetooth wire through the headliner across the passenger side of the car.


I ran the wire down the back and then down the side of the rear seat. You can barely see the wire.


You can see the XM (grey box closest to you) and the bluetooth (black box farthest from you) boxes. I mounted them there and then ran all the wires to the front.


The XM radio antenna mounted on the back deck of the car. I also mounted the NAV GPS antenna back there to on the other side of the brake light.


The wires going from the back seat to the front.


I ran the wires under the panel on the side by the floor.


Then I ran the wires up under the glovebox to the back of the radio.


The finished install!


The finished install with the radio turned on.


Playing a movie on the screen! This picture looks bad but in person it looks REALLY good!


You can see that the red in the screen matches really well with the rest of the car.


Another night picture.

Ok, here are the parts you need:

Metra Electronics Corp. - 40-VW54 - Amplified Antenna Adaptor


Metra Electronics Corp. - 70-1787 - Wiring Harness To Wire Into Bose Speakers w/OUT having to re-run wires


Metra Electronics Corp. - 99-9105 - The Dash Kit. It comes with a lot more than what you need but it is the only one that looks good IMO.


All these items can be bought off of crutchfield.com.

As for the bluetooth adaptor just go get the D3x package. It comes with that plus the remote for a REALLY good price.



Hope you all enjoy it! If you guys are looking for any type of in-dash DVD/Navigation systems you should consider this one. It's amazing!

Josh


************************************************** ************************************************** *******************************************

I just got my bonus from work so now I have money ;D I decided to get a Pioneer Avic D3 Nav unit for my S4. I will update this thread with pictures of the install once I get all the parts I need. I called every car audio place here in Spokane, Valley, and CDA and NO ONE has all the parts I need. So I had to order the dashkit and a special wiring harness since I have the BOSE system in my car. I really don't want to re-run all the wires for all the speakers PLUS I can now have 5.1 Surround sound in my car to watch movies with! Here are some pictures of everything thats going into the car. I got a sweet package deal that came with the HU, Bluetooth system for my cell phone, I-Pod adaptor cable, and a remote for $800! I should have the other parts monday or tuesday.


All the stuff.
OH And see that blue case thing sitting behind everything? In that case are 2 1796 Bust Dollars (Coins) that I am shipping to someone for work. Each one of those coins is $11,000!!!! Yes, $11,000 EACH!!!! Just thought I would mention that. LOL



More Stuff (The dash kit here doesn't fit my car)


Part of the wiring harness.

Josh

__________________

Quote:
ORIGINAL: Leonardo DaVinci
"Once you have tasted flight, you will forever walk the ground with your eyes turned skyward, for there you have been and will always want to be."
Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Audi Forums!
  #2  
Old 03-29-2008, 06:02 PM
MrFlippant MrFlippant is online now
Senior Member
 
Join Date: Jun 2007
Location: Des Moines
Posts: 2,650
Default RE: Pioneer Avic D3 Install

Sweet! Have fun installing it!
__________________

1997 Audi A4 2.8qm | Brilliant Black 12v FTMFW!
Reply With Quote
  #3  
Old 03-29-2008, 06:14 PM
acollicott acollicott is offline
Senior Member
 
Join Date: Jun 2007
Location: Iowa - Land of the Corn
Posts: 1,129
Default RE: Pioneer Avic D3 Install

Should be sweet when you get it done. I'm hoping to get the same unit here in the next month, so keep us posted and make sure to put up lots of pics when you do the install
__________________
Reply With Quote
  #4  
Old 03-29-2008, 06:28 PM
Khardysius Khardysius is offline
Senior Member
 
Join Date: Dec 2006
Location:
Posts: 560
Default RE: Pioneer Avic D3 Install

How does this compare to the RNS-E? (Or Audi type Nav)
__________________

2002 Audi A6 4.2 Quattro || Koni Shocks || Eibach Springs || Hotchkis Sways
255/17ZR40 ContiExtremeContact || Hawk HPS Pads || Goodridge Lines
Reply With Quote
  #5  
Old 03-29-2008, 07:48 PM
Audi311 Audi311 is offline
Senior Member
 
Join Date: Jun 2007
Location:
Posts: 105
Default RE: Pioneer Avic D3 Install

What's your address...cuz umm I wanna 'look' at those coins
__________________
2000 Audi A4 1.8t Quattro 5spd
Forge DV
CAI
GIAC Chip
Reply With Quote
  #6  
Old 03-29-2008, 10:47 PM
ThePaintballGuy ThePaintballGuy is offline
Senior Member
 
Join Date: Aug 2006
Location: Spokane WA
Posts: 4,771
Default RE: Pioneer Avic D3 Install

HAHA Yeah I will get a lot of pictures during the install.

And with the coins.... Good luck!

Josh
__________________

Quote:
ORIGINAL: Leonardo DaVinci
"Once you have tasted flight, you will forever walk the ground with your eyes turned skyward, for there you have been and will always want to be."
Reply With Quote
  #7  
Old 03-29-2008, 10:55 PM
audi_n00b audi_n00b is offline
Senior Member
 
Join Date: Aug 2007
Location:
Posts: 569
Default RE: Pioneer Avic D3 Install

I bet you're going to love your new Navi. I got the same one and I am thrilled with it. It works really well and it looks so clean, almost like it came stock with the car.
__________________
Reply With Quote
  #8  
Old 03-29-2008, 11:05 PM
Dj Spiel's Avatar
Dj Spiel Dj Spiel is offline
Senior Member
 
Join Date: May 2005
Location: Chicago, IL
Posts: 2,914
Send a message via AIM to Dj Spiel Send a message via Yahoo to Dj Spiel
Default RE: Pioneer Avic D3 Install

dude-ur a balla! buy me a RS4
__________________



myspace.com/djspiel
www.djspiel.com
http://www.b-13photography.com/
AIM=Djspi3l
AIM=Paulvirtual
Reply With Quote
  #9  
Old 03-30-2008, 01:32 AM
fcamargo6thave fcamargo6thave is offline
Senior Member
 
Join Date: Mar 2007
Posts: 166
Default RE: Pioneer Avic D3 Install

Yea man this is hott unit i personally have the alpine with the blackbird setup but the d3 is just as good. My question to u is whatMetra parts u are using for ur installation I work in a retail store in jersey if u have a 2002 s4 it should be the mtr99-9102the harness is mtr701787 and i recommend u get the mtr 40vw54 which is amplified antenna adaptor let me know if u need any help
Reply With Quote
  #10  
Old 03-30-2008, 11:06 AM
MrFlippant MrFlippant is online now
Senior Member
 
Join Date: Jun 2007
Location: Des Moines
Posts: 2,650
Default RE: Pioneer Avic D3 Install

Holy crap, Spiel - your new sig is messing with my head...
__________________

1997 Audi A4 2.8qm | Brilliant Black 12v FTMFW!
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering

All times are GMT -4. The time now is 06:08 PM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.