Velocity RS4 Replica Rims

Audi Forums Audi Classifieds Photo Gallery Calendars Search Recalls TSB's Contact AF Sponsors
Audi Lineup Audi News Forum FAQ AF Decals Audi Timeslips Register Login

Velocity RS4 Replica Rims

Printable Version

Audi Forum >> Audi Models >> Audi A6 >> Velocity RS4 Replica Rims

Page: [1]

Message

<< Older Topic Newer Topic >>

Velocity RS4 Replica Rims - 4/9/2008 1:21:07 PM

ppgoal

Posts: 696
Joined: 9/8/2006
From: Holland MI
Status: offline

I've been a advocate of these "cheaper" rims for some time, so a confession about quality is due. Last weekend I detailed my A6 including removing the wheels and cleaning/waxing them. During my inspection I found about 3/4" of paint had chipped off the inside of one spoke. This did not look like rock damage, but as if it flaked off.

Not sure it's related, but I hear a pinging noise at low speed from these rims that I don't hear with my OEM rims. At first I thought it was something in the suspension, but when I swapped back to the OEM rims last fall it went away. I noticed it again after I swapped the Velocities back on. I'm a little concerned that one wheel may be flexing and making this noise - I just hope I don't encounter metal failure. I'll be keeping a close eye on the spoke that chipped in case that's where the wheel is flexing and it caused the paint to come off. I covered the bare metal with some silver touch-up paint and it's not noticeable.

Maybe you do get what you pay for. I'm willing to admit I made a mistake if it turns out these rims have problems.

_____________________________

2003 Audi A6 2.7T MT6
Premium Package-Cold Weather Package-Bose
GIAC-Bailey DVs-Samco TBB
AWE Stage 2 Clutch+Lightweight Flywheel
235/45 R17 Pirelli P6 All-season; OEMs
235/40 ZR18 ContiExtremeContact;
Velocity RS4 Replica Rims

Post #: 1

RE: Velocity RS4 Replica Rims - 4/9/2008 4:42:47 PM

Slurm

Posts: 87
Joined: 6/25/2007
From: Fort Wayne, IN
Status: offline

just consider what the material is you are buying. Since these are wheels, solid metal, the price should reflect quality in some way. Metal costs the same around the world (at the same given time) and if one company is manufacturing wheels for a highly reduced rate its most likely because corners are being cut somehow. Whether those corners are in the finishing process, the preinspection of the metals, etc etc...theres a reason they are able to sell you the product at a reduced rate.

I've looked at velocity's wheels, they look fantastic, but the price has always scared me. Its understandable why someone would buy them though, I considered it just to get some better looking wheels on the car, but Ill be buying Hartmann replicas once i can afford them.

_____________________________

2004 A6 2.7T S-Line

(in reply to ppgoal)

Post #: 2

RE: Velocity RS4 Replica Rims - 4/9/2008 6:24:57 PM

Trigger Happy

Posts: 30
Joined: 4/1/2008
Status: offline

I agree with Slurm if the price seems to good to be true it probabaly is. Alittle of topic though, Slurm what is the difference between the A6 s-line and the regular A6?

(in reply to Slurm)

Post #: 3

RE: Velocity RS4 Replica Rims - 4/9/2008 6:32:14 PM

Slurm

Posts: 87
Joined: 6/25/2007
From: Fort Wayne, IN
Status: offline

S-line gives you the "Sline" Badging, rear spoiler, lower suspension, and 15 more HP....may be more, but im not sure

_____________________________

2004 A6 2.7T S-Line

(in reply to Trigger Happy)

Post #: 4

RE: Velocity RS4 Replica Rims - 4/9/2008 6:35:01 PM

GDET09

Posts: 207
Joined: 1/1/2008
Status: offline

How disappointing. I was really wanting these for my A6.

. I love how the Velocities aren't as flat as other replicas, it makes them look so much better and the price is great. Anyone know any other companies that make the RS4 replica rim other than Hartmann?

(in reply to Trigger Happy)

Post #: 5

RE: Velocity RS4 Replica Rims - 4/9/2008 7:53:51 PM

audia6s

Posts: 219
Joined: 1/25/2008
Status: offline

I was initially looking at Velocity but I am glad that they all went out of stock and I ended up buying Hartmann RS4 replica. They look awesome...GMP performance was running sale so i got a good deal on them.

_____________________________

2006 Audi A6 3.2 (Blue and Amaretto)
Tech and Premium Package
RS4 replica wheels
2005 Infiniti G35 coupe

(in reply to GDET09)

Post #: 6

RE: Velocity RS4 Replica Rims - 4/9/2008 9:09:24 PM

cbock

Posts: 107
Joined: 10/26/2007
Status: offline

i got hartmann b7 rs4 reps too. i'm very happy with them. although, i've only had them on for a month or so.

_____________________________

2002 A6 2.7T 6MT
GIAC, EVO DVs, Hartmann RS4 Reps, H-Sways, KW Variant 2, Samco Hoses, SPEC Stage 2 & LWFW

(in reply to audia6s)

Post #: 7

RE: Velocity RS4 Replica Rims - 4/9/2008 9:12:29 PM

trapped

Posts: 638
Joined: 1/29/2008
From: St. Louis, MO
Status: offline

To me it seems that Hartmann is the way to go. I have seen many people running them and they are love it.

_____________________________

2000 A6 2.7t
Tiptronic
APR Chip, 710n DV's, K&N drop-in, 00022 tip re-code.
Planned: Nothing :(

(in reply to cbock)

Post #: 8

RE: Velocity RS4 Replica Rims - 4/10/2008 4:09:35 AM

audia6s

Posts: 219
Joined: 1/25/2008
Status: offline

We have some happy campers who have velocity but I dont think we have a long term reviews/feedback on these wheels.

_____________________________

2006 Audi A6 3.2 (Blue and Amaretto)
Tech and Premium Package
RS4 replica wheels
2005 Infiniti G35 coupe

(in reply to trapped)

Post #: 9

RE: Velocity RS4 Replica Rims - 4/10/2008 8:21:22 AM

ppgoal

Posts: 696
Joined: 9/8/2006
From: Holland MI
Status: offline

I assumed the low Velocity prices were due to the slave wages they pay imprisoned Tibetans to work in the Chinese sweatshops, not due to the price of material.

I'm also careful not to lick these rims as I don't want to get lead poisoning.

Seriously, what do a set of Hartmann's cost these days? I paid $700 for my Velocities including shipping last summer.

(in reply to audia6s)

Post #: 10

RE: Velocity RS4 Replica Rims - 4/10/2008 1:04:29 PM

trapped

Posts: 638
Joined: 1/29/2008
From: St. Louis, MO
Status: offline

I think you could get a set of harmans for $200 a wheel. Some of there stuff is more, but ACHTUNING.com usually has a pretty good deal going (right now).

_____________________________

2000 A6 2.7t
Tiptronic
APR Chip, 710n DV's, K&N drop-in, 00022 tip re-code.
Planned: Nothing :(

(in reply to ppgoal)

Post #: 11

RE: Velocity RS4 Replica Rims - 4/10/2008 1:22:14 PM

formulagigi

Posts: 1080
Joined: 4/23/2007
Status: offline

Sorry to hear, I feel bad as i remember you and i exchanging ideas on these wheels and i told you about Chinese made wheels.

I have always been told by professionals to stay away form wheels made in china for their poor finish quality but also their higher tendency to bend. Especially on cars liek ours, they're big and heavy.
That's why I went with HArtmann and pay about 1100/set (260/wheel+caps) + ~$100 shipping.

I had a GB going via GMP on Audizine b/c there was so muc interest whenI posted about mine but then only a few sets sold!:(
I think I might sell my DTMs and get their RS6 replicas. My DTMs have probably 1000 miles on them, wonder how much could get for them

Hartmann wheels are always made in Europe via one of the top 4 manufacturer including RH and Ronal.

I think ACHTUning just stopped their free shipping recently and sell their wheels so well that they hardly ever discount them. Sucks!
If you want a set, I can ask GMP if they could drop a few % but their GB is closed now and Hartmann gives their distributors little room to play with. The wheels are cheap in the first place and two they sell too well to discount :( But even 5 % is better than nothing.

_____________________________

2004 A6 Stg 2+ and 99 TJ...mod

(in reply to trapped)

Post #: 12

RE: Velocity RS4 Replica Rims - 4/10/2008 1:31:58 PM

trapped

Posts: 638
Joined: 1/29/2008
From: St. Louis, MO
Status: offline

Gigi, If you wanted to sell the wheels w/ tires to me for $400 I would for sure buy them... Yeah right, but seriously if you consider selling please let me know.

_____________________________

2000 A6 2.7t
Tiptronic
APR Chip, 710n DV's, K&N drop-in, 00022 tip re-code.
Planned: Nothing :(

(in reply to formulagigi)

Post #: 13

RE: Velocity RS4 Replica Rims - 4/10/2008 2:03:00 PM

formulagigi

Posts: 1080
Joined: 4/23/2007
Status: offline

Everything is for sale... I am always open as I love change and was debating RS6 reps Vs DTMs when I bought...
but at the right price... $400, hummmm? what an offer! Let me think about it....

_____________________________

2004 A6 Stg 2+ and 99 TJ...mod

(in reply to trapped)

Post #: 14

RE: Velocity RS4 Replica Rims - 4/10/2008 2:03:29 PM

formulagigi

Posts: 1080
Joined: 4/23/2007
Status: offline

nah! I'll pass! :)

_____________________________

2004 A6 Stg 2+ and 99 TJ...mod

(in reply to formulagigi)

Post #: 15

RE: Velocity RS4 Replica Rims - 4/11/2008 5:07:46 AM

trapped

Posts: 638
Joined: 1/29/2008
From: St. Louis, MO
Status: offline

Oh Man, I thought you would give them to me today for that offer ;) On a serious note I would consider buying those DTM's. When you do decide to sell keep me in mind.

_____________________________

2000 A6 2.7t
Tiptronic
APR Chip, 710n DV's, K&N drop-in, 00022 tip re-code.
Planned: Nothing :(

(in reply to formulagigi)

Post #: 16

RE: Velocity RS4 Replica Rims - 4/11/2008 8:29:54 AM

formulagigi

Posts: 1080
Joined: 4/23/2007
Status: offline

PM me a offer (wheels only or tires too?), I could sell faster than anticipated.
trying to work a deal with a shop upon my return.

_____________________________

2004 A6 Stg 2+ and 99 TJ...mod

(in reply to trapped)

Post #: 17

RE: Velocity RS4 Replica Rims - 4/11/2008 9:10:58 AM

louiscolburn

Posts: 31
Joined: 12/14/2006
Status: offline

I have experienced flaking with Velocity's Replica wheels...on all four. ALSO...DO NOT GO THROUGH AUTO CAR WASH WITH THESE WHEELS!

(in reply to ppgoal)

Post #: 18

RE: Velocity RS4 Replica Rims - 4/11/2008 12:55:24 PM

ppgoal

Posts: 696
Joined: 9/8/2006
From: Holland MI
Status: offline

formulagigi - I made the decision to buy, knowing they were Chinese made and I was saving a few hundred. Caveat emptor.

I'm still very happy with the rims. The look great, especially when washed and waxed. The also appear to widen the car's stance a little bit because of the way they bow out from from the hub. I've never mounted an OEM rim and a Velocity on the same side, but the Velocities seem to move the tires out a little farther in the wheel wells.

Other than the one spot were paint flaked, I'm much happier with these rims than the SSRs that came with the car.

I should also note that they rims are only mounted during the summer and have never seen harsh winter driving or salt. In the summer, I hand wash the car. Hopefully that will preserve them longer.

(in reply to louiscolburn)

Post #: 19

RE: Velocity RS4 Replica Rims - 4/11/2008 4:47:41 PM

trapped

Posts: 638
Joined: 1/29/2008
From: St. Louis, MO
Status: offline

I don't think I can afford them for a little while longer. I would love the set, but i just don't have money right now. If you can hold on to them for a while like till june (long way off), I would have the money... Its just hard right now because I have to do the timing belt and the suspension.

_____________________________

2000 A6 2.7t
Tiptronic
APR Chip, 710n DV's, K&N drop-in, 00022 tip re-code.
Planned: Nothing :(

(in reply to ppgoal)

Post #: 20

RE: Velocity RS4 Replica Rims - 4/13/2008 9:55:09 PM

formulagigi

Posts: 1080
Joined: 4/23/2007
Status: offline

quote:

ORIGINAL: ppgoal

I'm still very happy with the rims. The look great, especially when washed and waxed. The also appear to widen the car's stance a little bit because of the way they bow out from from the hub. I've never mounted an OEM rim and a Velocity on the same side, but the Velocities seem to move the tires out a little farther in the wheel wells.

That's probably b/c the offset os more aggressive (i.e. ET 35 Vs. ET 43 or 45 on OEM) and they are also most likely wider.

_____________________________

2004 A6 Stg 2+ and 99 TJ...mod

(in reply to ppgoal)

Post #: 21

RE: Velocity RS4 Replica Rims - 4/14/2008 7:40:11 AM

turbo kraut

Posts: 2873
Joined: 11/6/2006
From: Des Peres, Mo
Status: offline

quote:

ORIGINAL: formulagigi

quote:

ORIGINAL: ppgoal

I'm still very happy with the rims. The look great, especially when washed and waxed. The also appear to widen the car's stance a little bit because of the way they bow out from from the hub. I've never mounted an OEM rim and a Velocity on the same side, but the Velocities seem to move the tires out a little farther in the wheel wells.

That's probably b/c the offset os more aggressive (i.e. ET 35 Vs. ET 43 or 45 on OEM) and they are also most likely wider.

and because of this... if you have a sagging shock or something you might hear that one rubbing something and that could be the clank/thud/ping/noise you are hearing with the rs4 wheels, not oe wheels

_____________________________

S4 bumper coming soon:)