AudiForums Home - Audi Marketplace - Audi Photo Galleries- Create an Account

Go Back   AudiForums.com > Audi Models > Audi A4 > B5 Models
Reload this Page Vagcom help..
Register Photo Gallery FAQ Members List Calendar Search Today's Posts Mark Forums Read




Reply
Page 1 of 2 1 2 >
 
Thread Tools
  #1  
Old 04-21-2008, 05:07 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default Vagcom help..
I just got a laptop with vagcom already installed.. I ran the codes and came up with 00140, 03242, 00101.. My car is undrivable, every time it hits 2,000rpms it looses all response and drops back to 500rpms.. The idle is very low and after attepmting to clear the codes nothing has changed, what do I do?!!
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #2  
Old 04-21-2008, 05:40 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
my lemmiwinks also wont work..
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #3  
Old 04-21-2008, 05:50 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
Its saying "Timed out waiting for 0x55 character (bad ECU response)


Ugh this is so frustrating!!!!!!!
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #4  
Old 04-23-2008, 09:51 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
When I do a test it says

COM Port status: OK
Interface status: 0 - found, ready
Fast - synch Compatible: NO

When I try to actually run it and check for fault codes it says

No response from controller

Ive tried everything... Can someone please help me!!!!! I dont have a car untill I get it running right
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #5  
Old 04-23-2008, 09:58 PM
hiwords hiwords is offline
Senior Member
  
Join Date: May 2007
Location: Binghamton NY
Posts: 3,308
Send a message via AIM to hiwords
Default RE: Vagcom help..
what version of vag com is it? also what cable you using?
__________________
01.5 2.8qm
Custom CAI, 18" Hp Lightning on 245/40/18 Kuhmo Ecsta MX, CC mod, tinted tails, 2x 12" Jensen sub with a 300 watt Bazooka Amp, Asian driver....
Reply With Quote
  #6  
Old 04-24-2008, 08:18 AM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
311 and its an ebay cable.. I think my problem is the cable. I was able to scan a total of about 4 things, like central locks and other bs. But everything else I try just says "no response from controller" so the only thing I can think is the cable is crap
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #7  
Old 04-30-2008, 07:35 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
Well its not the cable.. I took it to Autospeed's shop and had my friend run their vagcom and the same thing happen.. So now what? any ideas? I just graped an ECU off ebay for pretty cheap then I'll just have that customed tuned. But if I can figure out what is going on with this ECU I can sell it with the GAIC chip in it
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #8  
Old 04-30-2008, 07:44 PM
chaos92287 chaos92287 is offline
 
Join Date: Aug 2006
Location: Ft. Lauderdale/ Tallahassee, FL
Posts: 8,074
Send a message via AIM to chaos92287
Default RE: Vagcom help..
which cable are you using? serial or usb?
__________________


NOOBS CLICK HERE

http://ganja-grove.myminicity.com/sec

http://ganja-grove.myminicity.com/ind
Reply With Quote
  #9  
Old 04-30-2008, 09:06 PM
Ericp501 Ericp501 is offline
 
Join Date: Feb 2007
Location:
Posts: 212
Default RE: Vagcom help..
serial
__________________
99.5 B. BLACK 5SPD
K04..GIAC CHIP (PC-16)..DAHLBACK DV..BORLA EXHAUST.. TEST PIPE..ALL SAMCO HOSES..STAGE 3 CLUTCH/FLYWHEEL..SHORT SHIFT..H&R SPRINGS/BILSTEIN STRUTS..HIGHFLOW AIRFILTER..DIY COLD AIR FENDER HOLES..MBC 22psi.. guess my HP?
Reply With Quote
  #10  
Old 04-30-2008, 09:45 PM
chaos92287 chaos92287 is offline
 
Join Date: Aug 2006
Location: Ft. Lauderdale/ Tallahassee, FL
Posts: 8,074
Send a message via AIM to chaos92287
Default RE: Vagcom help..
there's a guy on Audiworld who had the exact same problem. he disabled LIFO plus lowered the baud rate and got it to work. which COM port are you using? serial ports are usually COM 1 but to make sure go into the device manager and double check the serial connection is the same COM port you are using to connect to the VAG software

here's the link to the thread (if you can understand AW's retarded forum) http://forums.audiworld.com/vag/msgs/6289.phtml
__________________


NOOBS CLICK HERE

http://ganja-grove.myminicity.com/sec

http://ganja-grove.myminicity.com/ind
Reply With Quote
Reply
Page 1 of 2 1 2 >


« Previous Thread | Next Thread »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering
Penske Audi West Covina
Royal Purple
GetCoolParts.com

All times are GMT -4. The time now is 01:24 AM.
Advertising Information -Contact Us - AudiForums.com - Archive - Top

© Internet Brands, Inc.
Terms of Service - Privacy Policy - Jobs
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.