Where do I put the sea foam in?!?! the one pic is to close up I don't know where the little thing is....





This is the pic that's too close up....

__________________

the vacuum line from the FPR to the manifold

__________________

Only the one line? Or both the line that goes into the PPR and the one that dissapears under the manifold?

__________________

remove the one blue line at the top of the "T" and run it throught there, i pretty sure any how, on the 1.8t the FPR connects to the manifold

__________________

I have lost my light, but is anyone sure that this is the line to run it to? Do you think someone could circle and post... I bet it would help every 2.8 owner wanted to Seaform, seeing as the only other thread on Google I can find about it has all dead picture links.

__________________

http://audiforums.com/m_848378/tm.htm

http://www.audizine.com/forum/showthread.php?t=201324



There's that post too, and none of them tell the poster where the vacuume line takes in.... Has any 2.8 owner actually done this?

__________________

I have. It's exactly in that second pic. If that "nipple" doesn't have vacuum try the other right next to it.

__________________
ecodes w/6K HID~20% tint~M3 spoiler~RS4 grille~painted lowers~brembos w/SS lines~remus/vibrant exhaust~CAI~sirius...
GIAC Tip Chip FS, pm me

On my car, and I have a 12v not a 30, there is no line that has a clamp down fitting on it like that.... Could they be different?

__________________

mine didnt have vacuum in the line previously selected, so as trey said, use this one if yours is suck-less

__________________

| -Neil- | This S6 Is No Longer Mine :[ |

The bottom picture, is the 30v only.... Does anyone know where it's at on the 12v? Is there anyway to just find it myself, and I'll post the pics...? A buddy said just take them all off and put the Seafoam in any line that's sucking? Is that dangerous to do? Sorry to drill the forums...

__________________