AudiForums.com

AudiForums.com (http://www.audiforums.com/forum/index.php)
-   B5 Models (http://www.audiforums.com/forum/forumdisplay.php?f=69)
-   -   changed suction pump, and it's STILL not working! (http://www.audiforums.com/forum/showthread.php?t=101815)

PRican1.8T 05-11-2008 08:09 PM

changed suction pump, and it's STILL not working!
 
okay, i got my car diagnosed by Audi and they said i needed a vacuum valve and a jet pump valve(suction pump). i just replaced them both new and now it's STILL shaking after i unplugged the battery overnight to reset the computer. what do i need to do?!

sineo 05-11-2008 08:40 PM

RE: changed suction pump, and it's STILL not working!
 
You need to go to AutoZone and have them scan your car (free) and then post the codes here or plug them into the search.

PRican1.8T 05-11-2008 10:55 PM

RE: changed suction pump, and it's STILL not working!
 
i've gotten the same codes. p0301-p0304. went to dealer and they said i needed vacuum check valve and jet pump valve (suction pump) so i replaced them, and it's still shaking on cold start! i don't understand!

sineo 05-12-2008 01:03 AM

RE: changed suction pump, and it's STILL not working!
 
What year? Could be coilpacks or spark plugs.

PRican1.8T 05-12-2008 01:47 AM

RE: changed suction pump, and it's STILL not working!
 
i've changed everything. fuel injectors, spark plugs, coil packs, ECT sensor, MAF is good, and now the vacuum check valve and suction pump, still, nothing

auditech79 05-12-2008 10:08 AM

RE: changed suction pump, and it's STILL not working!
 
Well there are 4 vaccum check valves in your engine, did you replace them all or just one? Does your engine sound like its sucking in air or not?

PRican1.8T 05-13-2008 12:47 AM

RE: changed suction pump, and it's STILL not working!
 
i only replaced one cause the dealer said i needed one and it was obvious which one i needed to change (i also blew through it after i took it out to check and air went through both sides) the suction pump was leaking a bit of oil. i can't really hear anything different except when i give it gas you can hear that it's "misfiring"

auditech79 05-13-2008 10:13 AM

RE: changed suction pump, and it's STILL not working!
 
You might have an ignition problem then, you need to have it scanned again, just go to autozone if you don't have a VAG COM, they can pull the codes for free. Then post the codes back here.

PRican1.8T 05-14-2008 12:14 AM

RE: changed suction pump, and it's STILL not working!
 
would an ignition problem fix itself after the engine's warmed up?

PRican1.8T 05-16-2008 06:59 PM

RE: changed suction pump, and it's STILL not working!
 
bump please!


All times are GMT -4. The time now is 02:31 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.