changed suction pump, and it's STILL not working!
Login | |
|
changed suction pump, and it's STILL not working! - 5/11/2008 5:09:50 PM
|
|
|
PRican1.8T
Posts: 98
Joined: 12/21/2006 Status: offline
|
okay, i got my car diagnosed by Audi and they said i needed a vacuum valve and a jet pump valve(suction pump). i just replaced them both new and now it's STILL shaking after i unplugged the battery overnight to reset the computer. what do i need to do?!
|
|
|
|
|
|
RE: changed suction pump, and it's STILL not working! - 5/11/2008 5:40:53 PM
|
|
|
sineo
Posts: 1503
Joined: 7/29/2007 From: Sh*t happens when you party naked. Status: offline
|
You need to go to AutoZone and have them scan your car (free) and then post the codes here or plug them into the search.
_____________________________
1999 A4 2.8 Quattro Avant SpeedTuning chip, painted lowers, black e-codes, 4300K, 20% tint, and face lift fogs. My Audi''''s got enough balls for the both of us.
|
|
|
|
RE: changed suction pump, and it's STILL not working! - 5/11/2008 7:55:46 PM
|
|
|
PRican1.8T
Posts: 98
Joined: 12/21/2006 Status: offline
|
i've gotten the same codes. p0301-p0304. went to dealer and they said i needed vacuum check valve and jet pump valve (suction pump) so i replaced them, and it's still shaking on cold start! i don't understand!
|
|
|
|
RE: changed suction pump, and it's STILL not working! - 5/11/2008 10:03:16 PM
|
|
|
sineo
Posts: 1503
Joined: 7/29/2007 From: Sh*t happens when you party naked. Status: offline
|
What year? Could be coilpacks or spark plugs.
_____________________________
1999 A4 2.8 Quattro Avant SpeedTuning chip, painted lowers, black e-codes, 4300K, 20% tint, and face lift fogs. My Audi''''s got enough balls for the both of us.
|
|
|
|
RE: changed suction pump, and it's STILL not working! - 5/11/2008 10:47:31 PM
|
|
|
PRican1.8T
Posts: 98
Joined: 12/21/2006 Status: offline
|
i've changed everything. fuel injectors, spark plugs, coil packs, ECT sensor, MAF is good, and now the vacuum check valve and suction pump, still, nothing
|
|
|
|
RE: changed suction pump, and it's STILL not working! - 5/12/2008 7:08:21 AM
|
|
|
auditech79
 Posts: 5081
Joined: 2/24/2007 From: Sacramento, CA Status: offline
|
Well there are 4 vaccum check valves in your engine, did you replace them all or just one? Does your engine sound like its sucking in air or not?
_____________________________
00 A4 1.8T
|
|
|
|
|