RC 630 injector installation issue

Printable Version

Audi Forums >> Audi Models >> Audi TT >> RC 630 injector installation issue

Page: [1]

Login Message << Older Topic   Newer Topic >>

RC 630 injector installation issue - 5/11/2008 7:55:21 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline Ok so im in the process of BTing my 1.8t fwd TT. The issue im having is that the injectors arnt sitting right on the intake manifold like there not long enough. So there getting a crappy seal. They are honda style injectors that were given to me. The top seals right and it sits in the harness fine only problem is the seal to the intake manifold. Is this possible or should i not even try? Post #: 1

RE: RC 630 injector installation issue - 5/11/2008 8:00:26 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline Im going to have to go with what Clay @ kinetic told you.  You are better off selling them and getting some injectors better suited for the multivalve head like Delphi's or Genisis _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 2

RE: RC 630 injector installation issue - 5/11/2008 8:14:55 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline Ok cool thanks for the quick response. (in reply to cincyTT) Post #: 3

RE: RC 630 injector installation issue - 5/12/2008 3:59:11 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline ehh sucks I have to rock a audi 100s till this BT is done. Hoping to have it done by next weekend, there is always something that goes wrong : /. (in reply to Audi858) Post #: 4

RE: RC 630 injector installation issue - 5/12/2008 4:03:15 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline welcome to the club.  _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 5

RE: RC 630 injector installation issue - 5/12/2008 7:32:44 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline Ok so I have the chance to swap my RC 650cc with my friend 675cc seimen injectors. Will this be alright to run on a 630cc file? Tuning wise im pretty sure ill have to mess with the A/F ratio is this possible with any software out there? (in reply to cincyTT) Post #: 6

RE: RC 630 injector installation issue - 5/12/2008 7:34:36 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline you may just need to pull some fuel out of idle with unisettings and a vag cable _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 7

RE: RC 630 injector installation issue - 5/12/2008 7:48:05 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline can I download unisettings anywhere? (in reply to cincyTT) Post #: 8

RE: RC 630 injector installation issue - 5/12/2008 8:05:41 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline their website and on vortex _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 9

RE: RC 630 injector installation issue - 5/12/2008 8:11:33 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline Awesome thanks very much. Is it pretty user friendly? (in reply to cincyTT) Post #: 10

RE: RC 630 injector installation issue - 5/12/2008 8:20:32 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline not all that complicated.  can only increase or decrease in %'s _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 11

RE: RC 630 injector installation issue - 5/13/2008 7:49:46 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline Does any one have a print out of what the stock peramaters would look like on unitune? (in reply to cincyTT) Post #: 12

RE: RC 630 injector installation issue - 5/13/2008 7:50:45 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline everything should be at 100% i do believe _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 13

RE: RC 630 injector installation issue - 5/13/2008 9:04:35 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline so if it were a moded ecu it wouldnt be at 100% (in reply to cincyTT) Post #: 14

RE: RC 630 injector installation issue - 5/13/2008 9:05:49 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline they should be at 100% until you change them.  What ever is on the ecu (chipped or stock) will be 100% _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 15

RE: RC 630 injector installation issue - 5/13/2008 9:09:08 PM    Audi858   Posts: 140 Joined: 2/5/2008 Status: offline damn so there is no real way of telling what is on the ecu? (in reply to cincyTT) Post #: 16

RE: RC 630 injector installation issue - 5/13/2008 9:16:12 PM    cincyTT I can make pigs fly Posts: 14851 Joined: 12/14/2006 From: No longer Ohio Status: offline you have to run logs.  Go read that TTweakers thread eith on this or the next page _____________________________ FACTS > followers 197whp and 292wtq with no chip on stock ic, airbox and catback AEG crank +Scat rods + 83mm Wiseco pistons = CincyTT Version 2.0T For sale - 20mm wrist pin pistons and rods $175 + sh (in reply to Audi858) Post #: 17

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Audi Prices

Audi Cars
Audi A6 Audi S3
Audi A4 Audi S4
Audi TT Audi S6
Audi Dealers
Audi Clubs

Top 10 Posters
cincytt 14851 pandaxpress 14531 techbod 12826 onepoint8tee 10838 jestnomen 10682 awdaholic 10051 badluckaudi 9131 karl 8984 chaos92287 8048 i3uddha 7313

New Vendors
AMSOIL - Performance Oil Technology
Penske Audi West Covina
Royal Purple
GetCoolParts.com
K&N Engineering, Inc.