Quote:
ORIGINAL: mattrazzo
Could you post your VAGCOM HEX lighting string (the long one) so I can get it right? I played with these settings and couldn't seem to get it the way I wanted it.
|
Here's the instructions I followed:
1.Click on'09 - Central Electric'
2. 07 - long coding and click on 'Yes' for long coding
3. Click on Long Coding Helper
4. Write down your long coding
5. Go to byte 0, make sure that bit 0 (front fogs installed) and bit 4 (DRL North America) are marked
6. Go to byte 17 and mark bit 4 (DRL with dimmed low beam)
7. Click on 'Transfer Coding'
8. Quit out of the Long Coding Helper
9. Click on 'Do it!'
10. Verify that the new Long Code is stored
11.Click 'Done, Go Back'
12. Click 'Close controller, Go Back'
The thread that provided those instructions also said something about the DRL's only coming on when the handbrake was Off, but that isn't true for me - handbrake position doesn't matter. But the fogs as DRLturn off when the headlights are on, although they can still be turned on normally.
Here's my long codingafter the above change. CAUTION - THERE ARE CODING VARIATIONS BETWEEN INDIVIDUAL CARS. Be sure to write down your long coding before making any changes.
F1 8C 5F 80 C0 14 10 00 00 18 18 00 18 00 00 00 00 38 (was 28 before the change) FE 17 5C 11 00
Note I had previously enabled the headlights as DRL using OOOO-A3's blog instructions (great instructions there!), which changed the first byte from "E1" to "F1" (North American style DRLs). I might try switching to Scandinavian style DRLs instead to see what that does - maybe the handbrake activation?
Hope that helps.