So i bought the Forge 004.....
 

And now i have a question on installation. Correct me if im wrong but you NEED to plug the recirc hose with a 1" billet right? And after that is it just a simple plug in and your done? And what about hose clamps too... do you need new ones? And one more question. Can you buy billet plugs from local auto part stores or are they only basically online ordered? Thanks

RE: So i bought the Forge 004.....
 

do u have a DV recirculation kit> u plan on running that valve 100% atmosphere> i cant remember exactly but i think that valve does...u wanna make sure it recirculates or get the forge splitter if not

RE: So i bought the Forge 004.....
 

No im pretty sure it doesnt need to recirc. Because it is closed at idle. Which means i need to plug the recirc hose i believe

RE: So i bought the Forge 004.....
 

hmm i didnt remember if it was closed at idle or not...either way you should be able to find the plug at your hardware store like lowes ot home depot

RE: So i bought the Forge 004.....
 

wait so those this bov make the check engine light come on since it's not recirculating?

RE: So i bought the Forge 004.....
 

Yes it may cause a CEL...at least it did in my old eclipse that required a dv but that's anoher vehicle entirely. Yes you need to plug the hole.

RE: So i bought the Forge 004.....
 

it'll probably throw a cel if you don't recirc, or at least recirc some of the air.

RE: So i bought the Forge 004.....
 

Never had a cel from mine and no, you cant recirc it. It goes on the charge pipe and plug the intake