2000 a6 4.2.

can you change the upper control arms (on one side) and not change the lower and be ok? my local mech. says that just my right front upper control arms are bad but i was told once that you have to change all four (meaning 2 upper and 2 lower).

__________________
sd

I don't see y you would have to change them if they are not bad. It wouldn't make a difference. Are the bushings bad?

True, you don't have to change all of them at once. If you are paying for the work, you should minimize the expense. Put, you will have to go back sometime in the future. If you are buying your parts from the mechanic at mechanic's rates, you probably REALLY want to only replace those that have gone bad.

Since I do my own work, I am going to replace them all just to be done with it.

Bob

You certainly do not have to, but in my experience, when one starts to fail, another one will be right behind it! Plus if you buy a complete kit, it will save you money!

OOOO

__________________
Spec Stage II Clutch and Aluminum Flywheel, APR Software, APR Snub Mount, APR Downpipes and Test Pipes with Milltek Cat Back, Hyperboost Diverter Valves, K&N Drop In (Temp).

surely he just wants to sell you everything you can use (that's his job in a way) but it also is not a bad idea

__________________
Koni sport shocks ~ H&R Race springs ~ Febi control arms

Magnaflow Exhaust ~ K&N panel ~ GIAC ECU w/ Flashloader