The reason I am posting this here as well is because aside from all the interior pieces we overlay we also do exterior parts as well such as the B&C pillars, mirror caps or what ever else you want done. Thanks for looking, and here are a few pictures.

B & C Pillars $225 for all four pieces











I also have a few carbon fiber trim sets that I have available for purchase. For those of you who saw my post in the interior thread section for the B5, you know how good looking these sets are and the pictures do not do them justice. These overlays are absolutely beautiful and you cannot tell the difference between these and the original RS4 trim that came stock from Audi in Europe.

I also have a few B6/B7 sets as well and believe me when I tell you, that these will not last long as I have had no problems selling them in the past. I will post a few pictures and if you have any questions please feel free to ask.

Price is as follows.

10 piece kit - $575 which will include shipping.

6 piece belt line trim - $425

Pieces that are included in the 10 piece kit are as follows:

1) 6 PIECE BELT LINE TRIM. One in each door and two in the dash (one short one long)

2) 1 Hazard surround

3) 2 Ash trays (one front, one rear)

4)Shifter surround (please specify AUTOor MANUAL)

You must first send me your trim or there will be a $350 core charge as the cores are expensive. Other pieces can be done as well but will be quoted on a per order basis. Thanks and feel free to contact me for any questions.

Here are a few pictures of my interior and I do apologize as I am not the best photographer.













Thanks for looking.

__________________
"Just a Squirrel trying to get a nut"

2000 A4 Quattro w/ APR Stage III & ....



APR // Racetec // IForged // STaSIS // Neuspeed // ECS Tuning // H&R // Bilstien // GReddy //

how much for the mirror caps, really want that look for my s

__________________
2000 s4

those are phukn nice, but not the direction i wanna go with in my car. what i would like to track down is the piano key black for my b5. now that would be ideal. any one got a line on those? or can you make those to bro?

__________________
97' 1.8TQ
*Hyperboost HXC DV*K03-s(temporary)*Neuspeed Race Springs*
*Bilstein Sport Shocks*Labree HFC*Labree DP*

These are actually mirrors from a VW Passat that I custom made to fit. If you just want your mirror caps overlayed the price is $450 as it is very difficult to do the mirros in one piece but they look absolutely beautiful.

__________________
"Just a Squirrel trying to get a nut"

2000 A4 Quattro w/ APR Stage III & ....



APR // Racetec // IForged // STaSIS // Neuspeed // ECS Tuning // H&R // Bilstien // GReddy //

could youfind me a carbon fiber shifter knob with the audi symbol on it?

__________________
audi guru

That you'll have to find on your own, as I have never seen one.

__________________
"Just a Squirrel trying to get a nut"

2000 A4 Quattro w/ APR Stage III & ....



APR // Racetec // IForged // STaSIS // Neuspeed // ECS Tuning // H&R // Bilstien // GReddy //

could i purchase just the interior pieces and only some of them? if so i would be very interested in doing that asap.

$425 for the B7 trim

If you have any other questions please email me as I have not been able to reply to PM's due to the problems with this site. Sorry for the delay I tried sending you an email but I do not know if it went through.

- Fred

fred92det@aol.com

__________________
"Just a Squirrel trying to get a nut"

2000 A4 Quattro w/ APR Stage III & ....



APR // Racetec // IForged // STaSIS // Neuspeed // ECS Tuning // H&R // Bilstien // GReddy //

The site is working better now but I am still not receiving emails from the forum when someone posts in this thread so I'll just have to keep an eye out for comments, but a direct email is the fastest way to get a hold of me.

No interest?

__________________
"Just a Squirrel trying to get a nut"

2000 A4 Quattro w/ APR Stage III & ....



APR // Racetec // IForged // STaSIS // Neuspeed // ECS Tuning // H&R // Bilstien // GReddy //

heres a far out idea... do you think you could make a molding of the rear lip spoiler and then do that in CF? now that would really be something, but im sure it would be somewhat difficult with the curves and having to stick perhaps

__________________
2005.5 A4 2.0Tq 6speed

-Snub Mount
-Carbonio CAI
-Smoked side markers
-Smoked front bumper reflectors