Go Back   AudiForums.com > Audi Models > Audi A4 > B7 Models




Reply
 
Thread Tools
  #1  
Old 07-24-2008, 11:17 PM
ggracing_A4 ggracing_A4 is offline
Junior Member
 
Join Date: Jul 2008
Location:
Posts: 28
Default How do I program my garage door opener?

I have a 2006 Audi A4 and dont have the manuel. Anyone know how?
__________________
2006 A4 2.0 Quattro in progress
Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Audi Forums!
  #2  
Old 07-24-2008, 11:26 PM
b7a4/07busa b7a4/07busa is offline
Junior Member
 
Join Date: Jul 2008
Posts: 6
Default RE: How do I program my garage door opener?

Hold in the button of the trigger you want to use on the visor until it lights up and stays on. There is a sensor on the front driver side. Point and activate your garage door opener a couple feet from the sensor. It clones the signal. Check it to see if it worked, it should. If not, try again.
Reply With Quote
  #3  
Old 07-24-2008, 11:51 PM
harryd14 harryd14 is offline
Senior Member
 
Join Date: May 2008
Location: ATL
Posts: 725
Default RE: How do I program my garage door opener?

i think you might have to hold the button or press it at the same time while your pressing the button at the sensor on the front drivers side of the bumper between the lights and grill... but i could be mistaken
__________________
2005.5 A4 2.0Tq 6speed

-Snub Mount
-Carbonio CAI
-Smoked side markers
-Smoked front bumper reflectors
Reply With Quote
  #4  
Old 07-25-2008, 12:15 AM
eMacPaul's Avatar
eMacPaul eMacPaul is offline
Senior Member
 
Join Date: May 2008
Location:
Posts: 141
Default RE: How do I program my garage door opener?

I think I had to hold the two outside buttons for about 30 seconds to activate programming mode, and then once you've pressed the button you want to program you've got either 30 or 60 seconds.
__________________
2007 A4 2.0T CVT Cabriolet S-Line Phantom Black
APR, VAG to RTW, K&N air filter, Podi boost gauge
Smoked side reflectors & side markers, smartTOP controller
Xenon chrome DRLs, Hoen xenon fogs, city w/ fogs
Reply With Quote
  #5  
Old 07-25-2008, 02:14 AM
dmfan016 dmfan016 is offline
Senior Member
 
Join Date: Apr 2008
Location:
Posts: 220
Default RE: How do I program my garage door opener?

do you have a rolling garage code or a standard code that never changes theres two different processes....PM me about it
__________________
"America is all about speed; hot, nasty, bad ass speed" - eleanor roosevelt
Reply With Quote
  #6  
Old 07-25-2008, 02:57 PM
b7a4/07busa b7a4/07busa is offline
Junior Member
 
Join Date: Jul 2008
Posts: 6
Default RE: How do I program my garage door opener?

correction to what I posted earlier. i wasnt 100% sure so i checked my manual. push and hold I&III until the l.e.d. flashes after about 20 secs. pick the channel u wanna use and press it for about 5 secs and the indicator l.e.d. will flash slower. u now have 5 min to clone the signal. use the garage door opener about 1 foot from the sensor under the driver side headlight. push and hold. once signal is copied, the flashers on the car will flash 3 times. u can then release the button on the opener. it takes anywhere up to a min. good luck
Reply With Quote
  #7  
Old 07-28-2008, 08:04 PM
ggracing_A4 ggracing_A4 is offline
Junior Member
 
Join Date: Jul 2008
Location:
Posts: 28
Default RE: How do I program my garage door opener?

tried it.... the flashers flashed 3 times telling me it got copied but i didnt work. When i pushed the button to open the garage it didnt open

Any other suggestions?
__________________
2006 A4 2.0 Quattro in progress
Reply With Quote
  #8  
Old 07-29-2008, 04:18 PM
eMacPaul's Avatar
eMacPaul eMacPaul is offline
Senior Member
 
Join Date: May 2008
Location:
Posts: 141
Default RE: How do I program my garage door opener?

Some garages require you to also program the receiver to accept the new remote. If so, there should be a button somewhere on the garage unit to press, and then you'll press (and hold for a bit) the button on your car. You may need to press it a couple times for the garage receiver to learn it.
__________________
2007 A4 2.0T CVT Cabriolet S-Line Phantom Black
APR, VAG to RTW, K&N air filter, Podi boost gauge
Smoked side reflectors & side markers, smartTOP controller
Xenon chrome DRLs, Hoen xenon fogs, city w/ fogs
Reply With Quote
  #9  
Old 07-31-2008, 09:45 AM
esandes's Avatar
esandes esandes is offline
Senior Member
 
Join Date: Jun 2007
Location:
Posts: 140
Default RE: How do I program my garage door opener?

be sure to hit the learn button on the garage door opener.
__________________
2007 A4 2.0T Quattro
Reply With Quote
  #10  
Old 09-02-2008, 01:36 AM
samfoster samfoster is offline
Junior Member
 
Join Date: Sep 2008
Posts: 1
Default

Quote:
Originally Posted by ggracing_A4 View Post
I have a 2006 Audi A4 and dont have the manuel. Anyone know how?
Hi,

I would suggest to get another manuel.

So it will be easy for you to program garage door opener.
__________________
Sam Foster
Leeds, UK

Garage Doors Leeds
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering

All times are GMT -4. The time now is 04:55 AM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.