Starting Problems

Audi Forums Audi Classifieds Photo Gallery Calendars Search Recalls TSB's Contact AF Sponsors
Audi Lineup Audi News Forum FAQ AF Decals Audi Timeslips Register Login

Starting Problems

Printable Version

Audi Forums >> Audi Models >> All Other Audi Models >> Starting Problems

Page: [1]

Message

<< Older Topic Newer Topic >>

Starting Problems - 7/2/2005 12:36:10 AM

Slamed_audi

Posts: 1
Joined: 7/1/2005
Status: offline

Hey i just recently rebuilt my motor buy myself and it wont start it seems to turn over quikly it has spark, air and fuel it will back fire now and then but it still seems to turn over to rapidly as if the cam belt is broken or compression is out. wat would be causen this and would any 1 know wat the compression should be?

Make: Audi
Model: E Coupe (same as qautto
Yr: 1990 facelift
Engine: 2l 4cly k-jet tronic
GearBox: 5 speed manual
Fwd

anything else wanted to know just ask. help will be much appreciated

Current Mods:

Ice

2 12" Dub Subs
2 p4004 Rockford fosgate amps
4 sony 6x9's
2 6" cones
2 5 1/2 " cones
2 4 1/4" cones
pioneer head unit

Engine Mods

bigger 3lb fly wheel
twin plate clutch
bigger cam
titauam valves and valve springs
t51r Garret turbo (yet to be bolted on)
Motech m800 ( bolted on when turbo fitted)

Shocks

Kyb all round
Super low kings

Tyres
Handkook semi soft compound semi racing
17" chromes ( name yet to be found only set in country

Many more mods to come will update when i can be bothered :)

Post #: 1

RE: Starting Problems - 7/4/2005 12:09:46 PM

0fframp

Posts: 758
Joined: 3/9/2004
From: Swamplands of NJ
Status: offline

Sounds to me like you messed up your timing. It is very easy to do on 4-Cyl engines with intermediate shaft, which drives the distributor. Align your camshaft sprocket and crank pulley marks on their respective positions and visually check that the ignition rotor is aligned with the high tension lead for the number one cylinder.

(in reply to Slamed_audi)

Post #: 2