1/2" Plexiglass Box, 1600 Watt Amp, Subwoofers and Capacitor
 

I have a sealed subwoofer enclosure that is constructed entirely of 1/2" Plexigalss. This box was custom designed and built to fit into a 2002-2005 (B6) Audi A4 trunk space, but it will also fit in a variety of other vehicles. The front of the box is square, but the rear of the box is fabricated at an angle to contour the angle of the rear seats of the vehicle. It is 35 1/2" Long, 14 1/2" Tall and 16" Deep at the base of the box (it's deepest point). The top of the box also serves as a shelf for the amplifier that measures 35 1/2" Long x 13 13/16" Wide.

I have a Power Acoustik amplifier (Model #OV2-1600) that is mounted to the top of the enclosure. It is a 2-channel amp with an output of 1600 Watts Peak Power. It delivers 310 Watts RMS (continuous) per channel to each subwoofer.

I have 2-10" Eclipse Aluminum Cone Subwoofers (Model #SW7304DVP) mounted in the subwoofer enclosure. The subwoofers are capable of handling 800 Watts Peak or 400 Watts RMS (continuous) per subwoofer. The subwoofers have a 2" voice coil. The enclosure was designed to have the proper amount of free airspace for this particular subwoofer. The required air space per subwoofer is 1.39 Cubic Feet.

I have a Power Acoustik 2 Farad Capacitor (Model #PCNC-2F) that is mounted to the enclosure between the 2 subwoofers.

I purchased all of the equipment new and it has been well taken care of. I am selling because I no longer own my Audi A4 : ( and this enclosure takes up 85% of the trunk space in my new vehicle. Every piece of equipment works perfectly and it sounds great. I am asking 1000.00 for everything but that price is certainly negotiable. Serious inquiries only please. Thank you for your interest.

A4 Boost