Audi A3 97 model - and 19 inch ALLOYS
 

HI,

I was wondering if any one can help me?

I want to put 19" Miglia 1000 alloys on my audi ( im getting them dirt cheap)

The wheels came from a 2001 Chrysler PT Cruiser.(SAME PCD ETC)

On the back of the wheels are several stamps, around the centre these are E19, then 210, then 8.5JX19H2 and finally ET35. On the inside of one of the spokes it says. Made in Italy EVO-19

What i would like to know is would 19" Alloys , give me a less smoother ride. at the mo i have 15's and the car is very smooth. Would i loose this , if so what would u say on a 1 - 10 scale ...10 being a very smooth drive and 1 being a bumpy not so pleasent ride.

Thanks to any that can help

Regards

Samy

RE: Audi A3 97 model - and 19 inch ALLOYS
 

ok i uploaded what the car would look like with the same alloys but with 18 inch alloys.

RE: Audi A3 97 model - and 19 inch ALLOYS
 

Hi mate, if the wheels are 5x100 and offset et 35 then they should fit, they will look great, the car wont loose any of its smoothness, im running 19s and lowered 75mm and the car drives like a dream.