~250hp ~300ft/lbs?
 

I've been looking around for a nice set up and i would like your guys opinion. My goal for the car is 250awhp and as much torque as possible. Any suggestions? I'm not super rich so my limit is about $2000 for turbo kit, injectors, and ECU.

The clutch i'm getting before the kit. But does anyone have any suggestions?

here's what i've seen so far...

I already have:
Gutted Air Box
3" Cat delete Racing Downpipe
http://www.atpturbo.com/Merchant2/me...Code=AUDIVW-DP
BCSATP 3" Dump Valve aka "VES" Assembly
http://www.atpturbo.com/Merchant2/me...Category_Code=

I would need to buy
KO4 Turbo kit with PC16 Package $1899
http://www.awe-tuning.com/pages/shar...rain&IL=AWEK04

Stage 3 Clutch Kit (375hp/400ftlbs) $625
http://www.awe-tuning.com/pages/shar...n&IL=clutchnfw

Forge 007 "A Line" Diverter Valve $145
http://www.ecstuning.com/stage/edpd/...ategory=Intake


How much power do you guys think that will make? AWE-Tuning stated 247hp & 295ft/lbs with PC16 package. However i do not have a cat and while at Full Open Throttle it will be a full 3" exaust for about a good 2 feet before it dumps under the car.

Any Guesses?

RE: ~250hp ~300ft/lbs?
 

if u piece together the kit it may be cheaper... and i have a brand new k04 for sale. let e know.

RE: ~250hp ~300ft/lbs?
 

Dont get that kit from AWE. get the ECS stage 2, it comes with a flyhweel.

And the AWE numbers on hte K04 are Crank HP i think. Not Wheel HP

RE: ~250hp ~300ft/lbs?
 

those numbers are crank hp from awe. Your not going to get the numbers you want for $2k thats for sure

RE: ~250hp ~300ft/lbs?
 

cheapest way to get there? Elim 2871R or custom t3/t4 setup.. by the looks of it your DBC, so tuning is easier...

a FMIC would allow you to crank the boost higher.....

247/295 = 202AWHP/240AWTQ

RE: ~250hp ~300ft/lbs?
 

So basically get the following:
GTRS Eliminator or GT2871R $1595
http://www.atpturbo.com/Merchant2/me...ory_Code=VVWTK
ATP/Mika Tuned Fueling Kit $795
http://www.atpturbo.com/Merchant2/me...ory_Code=VVWTK

it's only $2390 so only $491 more and i'll get more power... But will the GTRS Eliminator or GT2871R bolt on to the stock monifold? And will i need a new intake to allow them to fit?

RE: ~250hp ~300ft/lbs?
 

check out Renn-Art.com

They have a complete kit for the 2871r.

This is a state-of-the-art, dual ball bearing Garrett turbo package, which includes 440cc injectors, 3bar FPR, a high flow exhaust manifold, a manual boost controller, a 3in MAF, and the new, highly anticipated UNITRONIC ECU tuning for the B5 A4. It will turn your car into a street/track monster. When you order, please specify preferred shipping method of your ECU and we will e-mail or call you with a shipping quote (with overnight shipping you can have as low as a 3-day downtime!).

Also, recommended is the 3" inlet pipe.

You could start out small and get the regular kit w/ unitronics tuning.... and then upgrade the mani... then everything else...


the renn art kit is 3,349.00

RE: ~250hp ~300ft/lbs?
 

His limit is $2000 [&:]

GT2X with mika is an option but mika sw has problems, that's what ppl say.

RE: ~250hp ~300ft/lbs?
 

Man I just got paid.. The things i could do..... Oh yeah .. Save for a house.. Damnit..

RE: ~250hp ~300ft/lbs?
 

GT2X Eliminator Hardware Kit $1,295.00
ATP 3" Inlet pipe upgrade for longitudinal 1.8T Audi/Passat $259.00
ATP/Mika Tuned Fueling Kit Turbo Upgrade (GT2X, GT28R, GT28RS, GT2871R, GT3071R, etc) $795.00

Total: $2,349.00

save $100 about the extra stuff such as clamps, hoses etc.