Audi A6 The mid-sized Audi A6 model offers more room to the driver and passengers over the A4 line.

O2 sensor codes

Old Apr 25, 2009 | 11:39 AM
  #1  
itledo's Avatar
Thread Starter
|
1st Gear
Joined: Apr 2009
Posts: 16
Default O2 sensor codes

2000 A-6 2.8l

The CEL light is on and Im getting codes 17530(P1122), 17548(P1140) and 16544(P0160)
When I check with an ohm meter as per Audiworld tech article which tells you to check resistance at connector in engine compartment, I get a reading below 20 ohms which the article states is OK. The car they are testing in the article is a B5 A4, does that matter? Thanks......
 
Old Apr 25, 2009 | 11:46 PM
  #2  
auditech79's Avatar
Site Moderator
Joined: Feb 2007
Posts: 9,004
From: Nor Cal
Default

17530
P1122
O2 Sensor Heater Circ.,Bank2-Sensor2 Open
17548
P1140
Bank2-Sensor2 Internal Resistance too High
16544
P0160
O2 Sensor Circ.,Bank2-Sensor2 No Activity Detected

Replace the O2 sensor on the drivers side, behind the cat conveter. The O2 sensor is toast. Those OHM tests only work on specific O2 sensors.
 
Old Apr 26, 2009 | 05:13 AM
  #3  
itledo's Avatar
Thread Starter
|
1st Gear
Joined: Apr 2009
Posts: 16
Default O2 sensor

Thanks.......
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
teddysart
B5 Models
0
Jul 4, 2012 12:52 PM
Jpadguy
Audi A6
1
May 15, 2012 05:01 PM
Jpadguy
Audi A6
1
May 12, 2012 08:14 AM
Chingon1988
Audi A6
1
Jan 7, 2012 12:46 AM
hartsoe1
B5 Models
7
Apr 4, 2008 06:39 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:19 PM.