Audi TT The Audi TT line, in both the coupe and roadster combines Audi's All Wheel Drive performance with the feel of a European sports car.

intake TEST

Old Jun 14, 2008 | 09:46 AM
  #1  
MeanAudiA6's Avatar
Thread Starter
|
3rd Gear
Joined: Nov 2005
Posts: 2,749
From: fort wayne IN
Default intake TEST

http://mkiv.com/techarticles/filters_test/2/index.html

this is before the aem was out let me find the new one

http://supraforums.com/forum/showthr...ht=AEM+dryflow

if you ever heard of ryan woons supra then u would understand
Ryan Woon
1400rwhp+ 1000ft/lbs+ Torque No NOS
Best 1/4 8.62@169.5mph
Best Mph 173.20mph
Best 60ft 1.38
3.4L Equipped!
3550lbs at the Scales!!!
Worlds Quickest AND Fastest 6spd Supra
Undefeated against all 6spd Supras
WOTM AUTO 8.45, All Boost, 1107rwhp!
Quickest All Boost Auto Supra

http://www.supraforums.com/forum/sho...d.php?t=445806 luckly i never had this problem with the modshack TTDA its made of a much better rubber coupler than that plastic junk they are talking about
 
Old Jun 14, 2008 | 11:04 AM
  #2  
beachchair's Avatar
2nd Gear
Joined: Dec 2007
Posts: 811
From: South Florida
Default RE: intake TEST

Good info. What other 5 minute mod gives you a 13 bhp gain?
I have a Neuspeed which came dry without any maintenance instructions. I assume it is a dry mesh, but the color (red) makes it looks closest to the K&N wet mesh.
 
Old Jun 14, 2008 | 11:16 AM
  #3  
achTTung's Avatar
5th Gear
Joined: Sep 2005
Posts: 6,678
From: Colchester, VT
Default RE: intake TEST

"Well, if you can trust the original source of data" So it wasn't even the mkiv sites test. Nothing yet is concrete. I'm not disagreeing that there are better filtering elements, but I can't believe that the ones that filter best, flow the best.
 
Old Jun 14, 2008 | 12:21 PM
  #4  
MeanAudiA6's Avatar
Thread Starter
|
3rd Gear
Joined: Nov 2005
Posts: 2,749
From: fort wayne IN
Default RE: intake TEST

still the tests are there take what u will from them.....as you can see the ones that filted the best had a better bhp gain.....hmmmmm interesting better flow and filtration..
 
Old Jun 14, 2008 | 01:19 PM
  #5  
achTTung's Avatar
5th Gear
Joined: Sep 2005
Posts: 6,678
From: Colchester, VT
Default RE: intake TEST

they ran their test with a vacuum cleaner, how'd they measure horsepower gains?

 
Old Jun 14, 2008 | 01:34 PM
  #6  
MeanAudiA6's Avatar
Thread Starter
|
3rd Gear
Joined: Nov 2005
Posts: 2,749
From: fort wayne IN
Default RE: intake TEST

do you really think they used the vac for hp??? im sure they dynoed all the different intakes.....
 
Old Jun 14, 2008 | 02:27 PM
  #7  
achTTung's Avatar
5th Gear
Joined: Sep 2005
Posts: 6,678
From: Colchester, VT
Default RE: intake TEST

all they mention is testing flow with a vac. that test isnt much to go by.
 
Old Jun 14, 2008 | 05:47 PM
  #8  
Murderface's Avatar
2nd Gear
Joined: Apr 2007
Posts: 1,198
From:
Default RE: intake TEST

Read stuff, kplzthx.



- Extracts of this article have been transcribed from a Japanese article featured in Revspeed Magazine, August 1999.
- The original test was based upon the results found when using filters specifically made to fit the Toyota Supra. However, the filtration is unlikely to differ, as all the filtration materials used are the same for every model of car.
- The cost given for the filters are based on a the kit for an R33 Skyline GTR, except the K & N kit which only currently exists for a Skyline GTS, and are inclusive of VAT.


Have you ever seen the stock turbo on a Supra? I've held the one off my buddy's 7M and it's about the same size or bigger than a T3-60. Those filters might make those kinda gains on a car that has to feed a 3.0L I6 but not so much on a 1.8T.
 
Old Jun 14, 2008 | 07:25 PM
  #9  
achTTung's Avatar
5th Gear
Joined: Sep 2005
Posts: 6,678
From: Colchester, VT
Default RE: intake TEST

This is getting old, I'm bored. Sorry.
 
Old Jun 15, 2008 | 12:42 PM
  #10  
achTTung's Avatar
5th Gear
Joined: Sep 2005
Posts: 6,678
From: Colchester, VT
Default RE: intake TEST

see, now THESE are tests. (btw, Im interested again)
http://www.youtube.com/watch?v=_SPd10AswCo Thats Pt. II of IV.
Still watching the other ones.
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:30 PM.