B5 Models Please discuss all 1996 - 2001 B5 A4 topics here...

(update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

Old Mar 3, 2008 | 04:02 PM
  #11  
TeeterTawter's Avatar
Thread Starter
|
2nd Gear
Joined: Mar 2006
Posts: 1,358
From: Sauga
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

Engine fault codes

17535-fuel Trim; Bank 1 (mult): System too rich
p1127-35-00 - -

17743- Engine Torque Monitor 2: Control Limit Exceeded
p1335 - 35-00 - - - Intermittent
 
Old Mar 3, 2008 | 04:11 PM
  #12  
chaos92287's Avatar
5th Gear
Joined: Aug 2006
Posts: 8,355
From: Orlando, FL
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

ouTTie914 was having problems with that code and her epc light. think she switched from an n75 to a mbc and hasn't had problems since
 
Old Mar 3, 2008 | 04:17 PM
  #13  
A4speed's Avatar
Senior Member
Joined: Jan 2006
Posts: 2,646
From: Orem, UT
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

Brain, as much as i like ur avatar, i miss you stewie one
 
Old Mar 3, 2008 | 04:51 PM
  #14  
chaos92287's Avatar
5th Gear
Joined: Aug 2006
Posts: 8,355
From: Orlando, FL
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

yeah, i always get complaints when i switch. but i've just had it for way too long.
 
Old Mar 3, 2008 | 05:26 PM
  #15  
TeeterTawter's Avatar
Thread Starter
|
2nd Gear
Joined: Mar 2006
Posts: 1,358
From: Sauga
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

installed a mbc just now, will see if that helps rid of the EPC.
I think i do have a vacum/boost leak, sits at 16 for vacum, and now i hear a constant hissing sound coming from the back of the engine near the firewall. goin to try a different method of connecting my boost tester to it. instead of the tip, im goin to use the pipe off the cold side of the intercooler to the tb. also goin to try a different spring/washer in the 004.
 
Old Mar 3, 2008 | 06:45 PM
  #16  
turbo kraut's Avatar
Tech Guru
Joined: Nov 2006
Posts: 5,868
From: Des Peres, Mo
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

somethinng else i do and always recommend, if all else fails, take it to the dealer, pay them 60 bucks to find the issue and fix it yourself

i have saved hundreds doing that
 
Old Mar 4, 2008 | 09:42 AM
  #17  
patty AT forge's Avatar
1st Gear
Joined: Jun 2006
Posts: 179
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

Another thing to try is connecting the 004 direct to manifold pressure, that is to say bypass the pressure tank that controls the valve (if your car has one that is...). I've heard of the solenoids going bad and causing the valve to behave oddly.
 
Old Mar 8, 2008 | 03:52 AM
  #18  
ouTTie914's Avatar
4th Gear
Joined: Jul 2006
Posts: 3,716
From: New York
Default RE: (update with codes) boost issue..still not fixed out of ideas and possible iusse with forge 004

Glad the MBC fixed your P1335! As for the hissing check the connections to your boost gauge.
Had the same problem, turns out a simple zip tie was all it took (this would also explain your gauge's incorrect readings).

Sure I could search but... What N75 does your car use?
Haven't heard of this fault in any other car except the TT.

Good luck with the running rich!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rkelsey10554
B5 Models
5
Mar 11, 2014 10:52 AM
pepsicolla
S Car Model Line
27
Jun 4, 2008 09:13 AM
TKneedsS4
S Car Model Line
5
Dec 2, 2007 11:57 PM
neur0tic
Audi TT
10
May 8, 2007 01:54 PM
matt1colorado
General Tech
17
Aug 21, 2006 11:12 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:23 PM.