Xenon headlight question?
Hey I am thinking of purchasing some Xenon Euros from either a 2000 or 2001 A4 to put on my 97 A4. I was just wondering if the brackets are set up the same, and if some custom fitting will be in store.
Thanks |
RE: Xenon headlight question?
You will have to trim the fender in order for one-piece headlights to fit, but Depo makes two-piece ecodes that require no modification, are HID compatible, and go for about $150 on eBay. Add a $70 HID kit from vvme.com or flashplus on eBay and you'll take years off the face of your A4.
|
RE: Xenon headlight question?
Yeah, I was considering some two piecers. Thanks
|
RE: Xenon headlight question?
You will have to trim the fender in order for one-piece headlights to fit, but Depo makes two-piece ecodes that require no modification, are HID compatible, and go for about $150 on eBay. Add a $70 HID kit from vvme.com or flashplus on eBay and you'll take years off the face of your A4. |
RE: Xenon headlight question?
Sounds good.
|
RE: Xenon headlight question?
Sineo is right - that's exactly what I run, and I love 'em. If you're not afraid of taking a grinder to your car's fenders, or you just feel the need to do so, then the one-piece setup is for you. If you want a more hassle-free solution, listen to her and get the Depo 2-piece setup with an aftermarket HID system.
|
RE: Xenon headlight question?
Not to thread jack but do the depo's ever fog up or discolor?
|
RE: Xenon headlight question?
Mine haven't and I haven't heard of anyone else's fogging either, as opposed to most of the halo sets.
|
RE: Xenon headlight question?
ORIGINAL: blue2.8a4 Not to thread jack but do the depo's ever fog up or discolor? |
RE: Xenon headlight question?
Yours did? Mine have yet to show a single bit of fog, and it's been raining and humid for 3 solid weeks.
|
RE: Xenon headlight question?
ORIGINAL: UpstateNYA4 Yours did? For the OP: They both would have, but before I even installed them, I ran a thick line of black silicone along the seam. Apparently, I didn't do a good enough job on one because it fogged up until a pulled it, opened it up after heating in the oven, added more silicone and then put it back together. If you're thorough the first time, you won't have to do that much. |
RE: Xenon headlight question?
Sineo, you are my hero.
|
All times are GMT -4. The time now is 07:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands