Hey guys,

Sorry if this has already been asked before but I couldn't find anything and I need help ASAP!! So my Audi didn't turn on the other day, it cranked and sounded like it wanted to start but just would turn over. I replaced the fuel pump with an aftermarket one and the problem persisted, thought I flooded the engine and when I check the spark plugs, they were burnt to crisp. I replaced the spark plugs and the car turn on and drove for a day and a half. The next day, I was driving on the highway and when i pressed the gas after about 20 minutes of driving the car turned off. I pulled over and the car would turn on but everytime i pressed the gas, it turned off. Had it towd to my house and now its doing the samething as the first time, cranking but not turning over like it has no gas. Ran a scan and it said it was the canshaft position senor, changed that from Audi and still nothing, now I put back the oem fuel pump and it's turning on but nothing. I received a code P2539 and P0101. Any help?

This is the most recent scan, i changed the cam shaft position sensor but the code still shows