Blind spot monitor failure - AudiForums.com

Go Back  AudiForums.com > Audi Models > Audi A4 > B8 Models
Blind spot monitor failure >

Blind spot monitor failure

Notices
B8 Models Please discuss all 2009+ B8 A4 topics here...

Blind spot monitor failure

Reply

 
 
 
  #1  
Old 09-12-2018, 10:18 PM
1st Gear
Thread Starter
Join Date: Apr 2013
Posts: 2
Default Blind spot monitor failure

currently getting a system failure message when trying to active blind spot monitor on my 2013 a4
codes are as followed.

3 Faults Found:
267776 - Data Set Implausible
B2012 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 211
Mileage: 176567 km
Date: 2018.09.05
Time: 16:26:49

729349 - Control Module for Lane Change Assistance
C1114 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 211
Mileage: 176567 km
Date: 2018.09.05
Time: 16:26:49

729605 - Control Module 2 for Lane Change Assistance
C1115 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 211
Mileage: 176567 km
Date: 2018.09.05
Time: 16:26:49
 
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning
Audi A3
1
11-15-2012 04:11 PM
ECS Tuning
B6 Models
3
11-15-2012 04:10 PM
ECS Tuning
S Car Model Line
2
11-15-2012 04:10 PM
4ringjunkie
Exterior/Body
0
10-04-2012 06:18 PM
Orttauq
Exterior/Body
0
12-14-2010 04:55 PM


Thread Tools
Search this Thread
Advertising
Featured Sponsors