2.7T parts: Timing, metal thermo housing, EGT sensors, after-run relocation etc.
#1
2.7T parts: Timing, metal thermo housing, EGT sensors, after-run relocation etc.
Parting out my 2.7T motor. I did a bunch of work to it not long before I pulled it. (about 5K) These are the newest/easiest parts to pull off. If you need
something else (EG combi-valve, cover, clips, hose etc.) feel free to email me:
Timing Set:
All of this has 5K on it. Usual full timing service. both rollers, tensioner, tensioner lever, timing belt, water pump with metal impeller and thermostat. This kit was from Europa Parts.
https://www.europaparts.com/timing-belt-kit-2-7t.html
Will not be including cam/crank seals or serp belt.
New: included parts = $273
Sell: $100
After-run Pump Relocation Kit:
Installed january 2012. Will include low temp sensor and clip as well.
https://www.ecstuning.com/b-genuine-...kit/078998998/
New: $275
Sell: $125
Metal T-Stat Housing:
Installed January 2012.
https://www.ecstuning.com/b-genuine-...ng/078121121j/
New:$166
Sell: $75
8 Ignition Coils (BEL) 6 used (205K - all working great, no misfires, no codes) and two brand new never used.
New: ??
Sell: $100 (all)
Pass and Driver EGT sensors. These were installed in July 2016 so I estimate they have about 15K on them. No codes. Bought new from ECS.
https://www.ecstuning.com/b-genuine-...wo/078998124b/
New: Believe I paid around $450
Sell: $200
Throttle Body boot w/pressure sensor and bracket. Installed 07/2016
New:??
Sell: boot & sensor $40
Starter:
Napa Premium reman starter.
New: $209
Sell: $100
All prices do not include shipping. Shipping will be actual cost and sent by your preferred carrier.
Can put parts on EBAY if you prefer but I will adjust a bit to cover fee's.
swamper8 is my EBAY handle so you can see I have 100% feedback.
Local pickup in Enfield, CT is fine.
stevenmcnulty79 at gmail.com
First come, First Serve
<img src="">
<img src="">
<img src="">
<img src="">
<img src="">
<img src="">
something else (EG combi-valve, cover, clips, hose etc.) feel free to email me:
Timing Set:
All of this has 5K on it. Usual full timing service. both rollers, tensioner, tensioner lever, timing belt, water pump with metal impeller and thermostat. This kit was from Europa Parts.
https://www.europaparts.com/timing-belt-kit-2-7t.html
Will not be including cam/crank seals or serp belt.
New: included parts = $273
Sell: $100
After-run Pump Relocation Kit:
Installed january 2012. Will include low temp sensor and clip as well.
https://www.ecstuning.com/b-genuine-...kit/078998998/
New: $275
Sell: $125
Metal T-Stat Housing:
Installed January 2012.
https://www.ecstuning.com/b-genuine-...ng/078121121j/
New:$166
Sell: $75
8 Ignition Coils (BEL) 6 used (205K - all working great, no misfires, no codes) and two brand new never used.
New: ??
Sell: $100 (all)
Pass and Driver EGT sensors. These were installed in July 2016 so I estimate they have about 15K on them. No codes. Bought new from ECS.
https://www.ecstuning.com/b-genuine-...wo/078998124b/
New: Believe I paid around $450
Sell: $200
Throttle Body boot w/pressure sensor and bracket. Installed 07/2016
New:??
Sell: boot & sensor $40
Starter:
Napa Premium reman starter.
New: $209
Sell: $100
All prices do not include shipping. Shipping will be actual cost and sent by your preferred carrier.
Can put parts on EBAY if you prefer but I will adjust a bit to cover fee's.
swamper8 is my EBAY handle so you can see I have 100% feedback.
Local pickup in Enfield, CT is fine.
stevenmcnulty79 at gmail.com
First come, First Serve
<img src="">
<img src="">
<img src="">
<img src="">
<img src="">
<img src="">
#2
EGT sensors SOLD
after run relocation SOLD
after run relocation SOLD
#4
No sorry the turbos are gone
Thread
Thread Starter
Forum
Replies
Last Post
pepsicolla
Archive - Engine/Performance Parts
2
07-21-2008 03:18 PM
brax
Archive - Want to Buy
0
02-03-2006 12:34 AM